Best 2011 Nissan Rogue Trailer Hitch Options- Video
Hey everyone, Ryan here at etrailer. Today, we're gonna be taking a look at our best trailer hitch options for the 2011 Nissan Rogue. We're gonna be looking at three different hitches available for the road: the etrailer.com, the CURT, and the Draw-Tite. And don't get me wrong, they're all fairly similar to the next one, but if you we're to ask me what one I would pick for my own Rogue, it'd be either the etrailer or the CURT. Honestly, I'd lean more towards the etrailer one just 'cause I like the way it looks a little bit better, the finish of it, more of a matte black, and I think it blends in a little bit, but that's not the only reason, the appearance. The etrailer and the CURT are going to have a little bit higher Tongue Weight capacities, so you can load them down a little bit more, and the receiver tube is gonna come out just a little bit further than the Draw-Tite, so it buys you a little bit of extra bumper clearance. more
8/24/2023 11:52:28 AM
etrailer Trailer Hitch Installation - 2011 Nissan Rogue- Video
Hi there Rogue owners. Taking your 2011 Nissan Rogue, we're going to be taking a look at and showing you how to install etrailer.com's Class 3, 2-Inch Trailer Hitch Receiver.And this is what our hitch looks like when it's installed. The cross tube is mostly hidden behind our bumper here. The little bit does stick down, but for the most part, you're not going to see it. Mostly just the receiver here at the back. And the receiver is kind of long to me, it does stick out a bit, but it doesn't detract from the looks of the vehicle too much.It's a Class 3, 2-Inch by 2-Inch Receiver, so it's going to be great for all of your towing needs, whether you want to put accessories in it, such as a bike rack or cargo carrier. more
1/27/2020 10:58:01 AM
Best 2011 Nissan Rogue Trailer Hitch Options e98846- Video
Today we're going to be taking a look at the best hitch options for your 2011 Nissan Rogue. Up top here we're going to have our etrailer brand hitch. Then right below that we're going to have our CURT hitch. Then finally down here at the bottom we're going to have our Draw-Tite hitch. Now all three of them are going to be Class 3 hitches, which means they're going to give us that 2" by 2" receiver tube opening and give us a wide variety of options for accessories to mount up. But if I was looking for a hitch for my Rogue, I would definitely go with the etrailer hitch for a few different reasons. more
12/14/2018 1:32:57 PM
Trailer Hitch Installation - 2011 Nissan Rogue - Curt- Video
Today on our 2011 Nissan Rogue, we're going to review an install of a Curt class 3 2-inch receiver hitch, part number C13204. Here's what it's going to look like once it's installed. This is a complete steel and fully-welded construction with a really nice black powder-coasted finish to resist rust and corrosion. The majority of our hitch is hidden nicely behind the rear bumper and inaudible 00:00:26. The only thing really exposed is our receiver tube. On each side of the receiver tube is our chain hold down. Going all the way through the receiver tube is a 5/8's pin hole. more
7/6/2015 1:32:17 PM
Trailer Hitch Installation - 2011 Nissan Rogue - Hidden Hitch- Video
Today on our 2011 Nissan Rogue, we're going to review an install, the Hidden Hitch Class III 2-inch Receiver Tube Hitch, part number HH87663. Here's what our hitch is going to look like once installed. This is an entirely steel constructed hitch with a fully welded design. It's got a really nice black powder coated finish to resist rust and corrosion. The main body of the hitch is hidden behind the rear fascia or bumper. The only thing really having exposed is the receiver tube, which has a chain hold down on each side, 5/8 pin hole that goes all the way through the receiver tube, and a 1/2-inch pin hole for a J-pin style anti-rattle bolt. This is a class II 2-inch by 2-inch receiver tube that's capable of up to 350 pounds of tongue weight and a 3500-pound tow capacity. more
7/1/2015 2:21:46 PM
Trailer Hitch Installation - 2011 Nissan Rogue - Curt C12122- Video
Today on our 2011 Nissan Rogue, we're going to review and install the Curt Class II 1-1/4" Receiver Tube Hitch, part number c12122. Here's what our hitch will look like once it's installed. The entire hitch is made of a steel construction and is a fully welded. It's got a complete black powder coated finish to resist rust and corrosion. It's really well designed. It's tucked up behind the rear face shift and isn't really exposed except for our receiver tube. more
7/1/2015 2:21:26 PM
Trailer Hitch Installation - 2011 Nissan Rogue - Draw-Tite- Video
Today on our 2011 Nissan Rogue, we're going to review and install the Draw-Tite Max-Frame Class III two inch Receiver Tube Hitch, part number 75902. Here's what our hitch is going to look like once it's installed. This is an entirely steel constructed hitch with a fully welded design. It's got a really nice black powder coated finish to resist rust and corrosion. The main body of the hitch is hidden behind the rear fascia or bumper. The only thing we really have exposed is our receiver tube which has a chain hold down on each side, five-eighths pin hole that goes all the way through the receiver tube and a half inch pin hole for a J pin style anti-rattle bolt. This is a class III two inch by two inch receiver tube that's capable of up to three hundred and fifty pounds of tongue weight and a thirty-five hundred pound tow capacity. Next, we'll go ahead and give you a couple of measurements to assist you in selecting accessories for your new hitch. more
7/1/2015 2:21:06 PM
Trailer Hitch Installation - 2011 Nissan Rogue - Curt C12247- Video
Today on our 2011 Nissan Rogue, we'll be installing the Curt Hitch, part number 12247. This is what our hitch will look like once it's installed. Next, we'll go ahead and give you a couple of measurements to assist you in selecting accessories for your new hitch such as a bike rack or cargo carrier. From the center of the hitch pin hole to the outermost edge of the bumper is 7 inches. From the top of the receiver tube to the ground is 10-1/4 inches. Now, let's go ahead with the installation. more
10/1/2012 12:20:27 PM
Trailer Hitch Installation - 2011 Nissan Rogue- Video
Today we are working on a 2011 Nissan Rogue. We are going to be installing a DrawTite hitch part number 75606. This will also be comparable to Hidden Hitch part number 87457. Here are a couple of measurements that will assist you in selecting accessories for your new hitch. From the center of the hitch pin hole to the outermost point of the bumper is 4-1/2 and from the top of the receiver tube to the ground is 13-1/4. This will assist you in selecting accessories such as a draw bar, a bike rack or a cargo carrier. more
11/21/2011 10:56:25 AM