Softride Dura Hitch Bike Rack Review - 2014 Nissan Titan- Video

Today on our 2014 Nissan Titan, we're going to be test fitting the Softride Dura Parallelogram, a tilting 4-bike rack for inch-and-a-quarter and 2-inch hitches, part number Sr26247. To begin our test fit, we'll slide the shank of the bike rack into the receiver tube of our hitch, line up our pin holes, thread in our anti-rattle bolt, and tighten it down with a wrench. We can then secure it, using the provided lock. In this position, we'll have about 19 inches worth of ground clearance. The closest point of the rack to the back of our vehicle is about 6 inches away, and overall, we've added about 35-1/2 inches to the length of the truck. The Dura Parallelogram has removable arms that allow for more storage options. more

Watch Video

4/29/2014 2:28:53 PM

Saris Axis 3 Bike Rack Review - 2014 Nissan Titan- Video

Today on our 2014 Nissan Titan, we're going to be test fitting the Saris Axis, a tilting 3-bike rack for inch-and-a-quarter and 2-inch hitches, part number SA843B. To begin our test fit, we'll slide the shank of the bike rack into the receiver tube of our hitch, line up our pin holes, thread in our anti-rattle bolt, and tighten it down with a wrench. We'll then secure it using the provided lock. In this position, we'll have about 19-1/2 inches worth of ground clearance. The closest point of our rack to the back of our vehicle is about 6 inches away, and overall, we've added about 13-1/2 inches to the length of the truck. Pulling the yellow T-handle at the base of the center mast, will allow us to tilt it away from our vehicle. more

Watch Video

4/29/2014 2:25:31 PM

Saris Freedom Hitch Bike Racks Review - 2014 Nissan Titan- Video

Today on our 2014 Nissan Titan, we're going to be test fitting the Saris Freedom. A platform style four bike rack for two inch hitches. Part number SA4414B. To begin our test fit, we'll slide the shank of the bike rack into the receiver tube of our hitch, line up our pinholes, thread in our anti-rattle bolt and tighten it down with a wrench. We'll then secure it using the provided clip. In this position we'll have about 19 inches worth of ground clearance. The closest point of the rack to the back of our vehicle's about four and a quarter inches away. more

Watch Video

4/29/2014 9:28:02 AM

Thule Helium Aero Hitch Bike Rack Review - 2014 Nissan Titan- Video

Today on our 2014 Nisan Titan, were going to be test fitting the Thule Helium Aero, a tilting two bike rack for 1-1/4 and 2 inch hitches, part number TH9042. To begin our test fit, well slide the shank of the bike rack into the receiver tube of our hitch. As we do this, well want to hold out on the attached pin. Well line up our pin holes. Allow the attached pin to fall into the pin hole. Well then turn the black knob. more

Watch Video

4/28/2014 10:50:25 AM

SportRack 3 Bike Rack Review - 2014 Nissan Titan- Video

Today on our 2014 Nissan Titan, we're going to be test fitting the Sportrack Tilting 3 Bike Rack for 1 1/14 and 2 inch hitches, part # SR2403. To begin our test fit, we'll slide the shank of the bike rack into the receiver tube of our hitch, line up our pinholes, thread in our anti-rattle bolt and tighten it down with a wrench. We can then secure it with the provided clip. In this position, we'll have about 19 1/4 inches worth of ground clearance. The closes point of the rack to the back of our vehicle is about 3 3/4 of an inch away, and overall we've added about 11 1/2 inches to the length of our truck. Pulling the black pin and clip at the base of the rack will allow us to tilt it away from our vehicle. As you can see, this allows us to fully open our tailgate. With our mast back in its upright position, we'll now pull the pin and the clip at the top of the rack. more

Watch Video

4/28/2014 10:49:52 AM

Softride Hang2 Tilting Bike Rack Review - 2014 Nissan Titan- Video

Speaker: Today on our 2014 Nissan Titan, we're going to be test-fitting the Softride Hang 2, a tilting two bike rack for 1 1/4" and 2" hitches, Part#SR27041. To begin our test fit we'll side the shank of the bike rack into the receiver tube of our hitch. Line up the pinholes. thread in our anti-rattle bolt and tighten it down with a wrench. In this position we have about 19 1/4" worth of ground clearance. The closest point of the rack to the back of our vehicle is about 4 1/2" away. And over-all we've added about 20 1/2" to the length of the Titan. Pulling the two pins at the top of the mass will allow us to swing our handle bar cradles up into position. more

Watch Video

4/28/2014 10:49:13 AM

Softride Element Hitch Mounted Bike Rack Review - 2014 Nissan Titan- Video

Today on our 2014 Nissan titan were going to be test fitting the Softride Element Parallelogram. A tilting 4 bike rack with 1 1/4 inch 2 inch 00:00:08 hitches part number SR26248. To begin our test fit, were going to side the shank of the bike rack into the receiver tube of our hitch, line up our pin holes, tread in our anti-rattle bolt and tighten it down with a wrench. In this position we have about 19 inches worth of ground clearance. Closest point of the rack to the back of our vehicles is about 4 inches away and overall weve added about 12 inches to the length of the truck.Pulling the silver pins at the top of the mast will allow us to swing out our cradle arms. Well rotate them into position and reinsert the pins into the new holes to secure them. more

Watch Video

4/28/2014 10:48:38 AM

Saris Thelma 3 Bike Rack Review - 2014 Nissan Titan- Video

Today on our 2014, Nissan Titan. We're going to be test fitting the Saris Thelma. A platform style 3-Bike rack for inch of a quarter and two inch hitches, part number SA4239B. To begin our test fit, we'll slide the shake of the bike rack into the receiver tube of our hitch. Lineup our pin holes, throw out in our anti rattle bolt and tighten it down with our wrench. We can then secure it using the provided clip. This position, we'll have about 19 in a quarter inch worth of ground clearance. more

Watch Video

4/28/2014 10:47:54 AM

Hollywood Racks Traveler Tow n Go Bike Rack Review - 2014 Nissan Titan- Video

Today on our 2014 Nissan Titan we're going to be test fitting the Hollywood Racks Traveler Tow-n-go 3 bike rack for 2 inch ball mounts, part number HR135. For today's test fit, we'll be using the Hidden Hitch ball mount with an extra long shank, part number 80232. We'll begin our test fit by sliding the shank of the ball mount into the receiver tube of our hitch, lining up our pin holes, sliding through a pin, and securing it with a clip. Now please keep in mind the ball mount, the pin and clip, and the hitch ball are all sold separately. As you can see, using the standard pin and clip does leave some play in our bike rack. If you'd like to secure it further, we do have anti-rattle devices. Just check our website for some more details. Now it's time to swing out our dual cradle arms. more

Watch Video

4/28/2014 10:45:59 AM

  1