bing tracking image

2011 Nissan Frontier Trailer Hitch Installation And Review Videos

     

Trailer Hitch Installation - 2011 Nissan Frontier - Draw-Tite- Video

Trailer Hitch Installation - 2011 Nissan Frontier - Draw-Tite

Speaker 1: Today on our 2011 Nissan Frontier, you're going to be taking a look at, I'm going to show you how to install the Draw Tite Class 3 Max-Frame trailer hitch receiver. Part number 75282.This is what our hitch looks like when it's installed. As you can see, it is hidden behind our bumper. The only thing we can really see is our safety chain loops and a little bit of our receiver tube. The receiver tube does sit back underneath our bumper, so we don't have to worry about hitting our legs or shins on it as we're walking around the truck.It going to be a class 3 hitch. It's going to be two inch by two inch. more


Watch Video

12/5/2018 1:38:17 PM



Best 2011 Nissan Frontier Trailer Hitch Options- Video

Best 2011 Nissan Frontier Trailer Hitch Options

Speaker 1: Today we're going to be taking a look at the best hitch options for your 2011 Nissan Frontier. Up top here we're going to have our Draw-Tite Class 3 hitch. Then right below that we're going to have our etrailer Class 3 hitch. Then finally, below that we're going to have our CURT Class 3 hitch.If I was looking for a hitch for my Frontier, I would probably go with the Draw-Tite for a few different reasons. It is going to have an increased tongue weight, which is going to be nice for a few different accessories we might want, or just to have your trailer, as well as some minor differences that it'll have over the two etrailer and the CURT. Let's take a closer look at all the differences between them.Our Draw-Tite is going to have the highest tongue weight at 750 pounds, and a gross trailer weight rating of 5,000 pounds. more


Watch Video

10/30/2018 10:17:26 AM



Trailer Hitch Installation - 2011 Nissan Frontier - Curt- Video

Trailer Hitch Installation - 2011 Nissan Frontier - Curt

Today on our 2011 Nissan Frontier we'll be installing the Curt Class 3 2 Inch Receiver 2 Hitch, Part Number 13241. This is what our hitch will look like once installed. Next are going to be a couple of measurements to assist your selecting accessories for your new hitch. From the center of the hitch pin hole to the outermost edge of the bumper is 3 1/2 inches. From the top of the receiver tube opening to the ground is 18 1/2 inches. This will assist your selecting accessories, such as a ball mount, bike rack, or cargo carrier. more


Watch Video

1/10/2014 11:50:30 AM



  1