Draw-Tite Max-Frame Trailer Hitch Installation - 2012 Dodge Charger- Video
Speaker 1: Today on this 2012 Dodge Charger we're going to review and install the Draw Tite Max Frame Trailer Hitch Receiver. Part number 76145. All right, this is what the hitch looks like once installed on our Charger. Our hitch is up tight against the bumper, and it's all recessed towards the front giving us this nice rounded collar here. Makes a nice smooth finish on it, not a rough square. And you also notice that it has a two inch by two inch receiver opening. more
11/18/2018 9:02:12 AM
Best 2012 Dodge Charger Hitch Options- Video
Speaker 1: Today, we're going to be taking a look at the best hitch options for your 2012 Dodge Charger. So here, we're going to have our Draw-Tite class three, and right below that, we're going to have our Curt class three. Now, right off the bat, our hitches do look very similar, but there is some big differences to them. For instance, the small difference that we can notice right away is that collar. The Draw-Tite is going to have more of a tapered, rounded look to it, whereas the Curt is going to have more of a flush cut look.Now, just the difference in the way they look .. I will let you know that the Draw-Tite ... more
1/4/2018 1:29:52 PM
Trailer Hitch Installation - 2012 Dodge Charger - Curt C12064- Video
Today on this 2012 Dodge Charger V6 model, were going to install part number C12064 from Curt. This is what the hitch looks like when its installed on the vehicle. Next well give you some measurements that will help you out in selecting some accessories, such as a bicycle rack or a cargo carrier. From the top of the receiver opening down to the ground will be about nine and a quarter inches. From the center of the hitch pin hole to the edge of the bumper will be about seven inches. Now well go ahead and show you how the hitch is installed. more
1/25/2013 1:59:01 PM
Trailer Hitch Installation - 2012 Dodge Charger - Curt C13093- Video
Today on this 2012 Dodge Charger, well install part number 13093 from Curt. This is what the hitch looks like when its installed on the vehicle. Next, well go ahead and give you some measurements that will help you out in selecting some accessories such as a ball mount, bicycle rack, or a cargo carrier. From the center of the hitch pin hole to the outside edge of the bumper is going to be 7-1/2 inches. From the top of the receiver opening down to the ground is going to be 8-1/4 inches. Now, Ill go ahead and show you how the hitch is installed. more
5/17/2012 10:50:50 PM