Best 2007 Ford Van Hitch Options- Video
Today on our 2007 Ford van, we're going to take a look at the best hitch options available. These are the three hitches we have here. First one on top, we have our Ultra-frame from Drawtight, part number 41945. Now this is a class five hitch. Next one up is a Curt, part number 14055, this one is a class four hitch. Down here, we have another one from Drawtight, part number 75703 and this one will be a class three hitch. Let's go ahead and take a look at the Ultra-frame from Drawtight. more
1/5/2017 3:23:10 PM
Trailer Hitch Installation - 2007 Ford Van - Curt- Video
Today on this 2007 Ford Van, we're going to show you the Curt Class IV two-inch receiver hitch, part number 14055. This is what the hitch looks like when it's installed on our van. On an initial look, you can see the whole hitch actually does sit below the bumper and has a square tube body. This is our two-inch opening here, with a nice, rounded reinforcement collar on it. Further back it uses a 5/8ths hitch pin, or your favorite locking hitch pin. This plate on the bottom also doubles as your six chain loops. It's a very easy install it uses existing holes, and all the hardware is provided. more
8/24/2015 4:13:40 PM
Trailer Hitch Installation - 2007 Ford Van - Curt 13055- Video
Today on this 2007 Ford van, we're going to show you a Curt Class 3, two-inch receiver hitch, part number 13055. This is what a hitch looks like when it's installed on the van. See how the body of the hitch sits below completely inaudible 00:00:13. Now, it does have a nice, round tube shape to it, so it doesn't look too bad underneath the van. This is our two-inch opening right here. It has a nice, rounded reinforcement collar around it. We look further back. more
8/24/2015 4:13:25 PM
Trailer Hitch Installation - 2007 Ford Van - Draw-Tite- Video
Today on 2007 Ford Van E250, we're going to show you a draw type ultra frame, class five, two inch receiver hitch, part number 41945. Alright this is what the hitch looks like once installed on the van, okay. Now this does fit below the bumper, probably about a good inch or so. First off is the receiver itself, all this is created for once cast piece of material, so it's definitely going to be strong, it's not going to wear out, compared to a conventional hitch using structural shapes. This whole piece is cast, we have very generous lubes right here for your safety chains. This is still a two inch opening as well. As does you the five eights inch hitch pin, even though there's a smaller hitch pin hole here as well. more
8/24/2015 4:11:06 PM
