Trailer Brake Controller Installation - 2003 Ford F-350- Video
Today in our 2003 Ford F250 superduty we're going to show you how to install the Tekonsha Primus IQ proportional trailer brake controller. This operates on of the 3 axials and part number is TK90160 we're also going to be using the pig tail, part number 3035-P for our factory Ford connection. Here's what our Primus IQ is going to look like once we get it installed. As you can see, nice easy to operate, easy to use style brake controller. We've got our manual override. It's right here. This is going to allow us to manually apply power to our brake in those emergency situations where maybe our trailer starts to get a little out of wack. more
6/5/2015 9:51:58 AM
Trailer Brake Controller Installation - 2003 Ford F-350 90885- Video
Today on our 2003 Ford F350 Super Duty we'll be installing the Tekonsha Prodigy P2 brake controller, part number 90885. We'll be doing this in conjunction with the Tekona Plug-N-Play wiring adapter for the brake controller, part number 3035-P. Let's go ahead and connect the trailer braking. Once connected our display will read or show a C that indicates our trailer wiring is connected. Then on the driver side of the brake controller is our gain, which will allow us to increase or decrease the output and power going to our trailer braking. On the passenger side of the brake controller at the top is our boost mode button. We have three different boost modes that can be adjusted as necessary depending on the trailer's size and weight. more
2/3/2015 7:28:16 PM
Trailer Brake Controller Installation - 2003 Ford F-250 Super Duty- Video
Today on this 2003 Ford F250 Super Cab, we're going to install part number 90195. This is a Tekonsha Prodigy P3 Trailer Brake Controller. First, we'll go ahead and install our brake controller in the location on the truck. We're going to use this location right here. Our truck already had our brake controller previously installed here, so we're just going to reuse the existing holes. This is our bracket that comes with the P3 brake controller. more
9/5/2014 10:17:08 AM
Trailer Brake Controller Installation - 2003 Ford F250- Video
Just to give you a reference point, this is the top, right here of the gas pedal, so basically its across up on this pillar here. While were here well plug in our brake controller adapter and that will be part # 3035-P. Now we can plug the other end of this into our brake controller after we install the mounting bracket. Next well mark our bracket for positioning, well just hold it up here on this bottom edge where its nice and flat. In this corner right here, well just make a small dot for reference and then well put our first screw there. Afterwards well put our brake controller inside and eyeball it to make sure we get it straight. When we have positioned the way we want it, we ll make our secondary screw install here. Okay at this point we can simply install our adapter cable in then well just mount right here. We have the brake controller installed now, the last thing we do is take the wires and zip tie them into a safe position and all we have to do is test. more
7/22/2008 9:21:09 PM
