2010 Ford F-150 Trailer Brake Controller Installation And Review Videos

Best 2010 Ford F-150 Brake Controller Options- Video

Speaker 1: Today we're going to be taking a look at the best brake controllers available for the 2010 Ford F-150.Now, all the brake controllers that we're going to look at today are proportional controllers. It's a newer technology available, and it really is just a lot better than what the time delayed systems used to be. Basically, with the time delayed system it was pre-programmed when your brakes would engage. So, you hit the brake in your vehicle, there might be a pause before the brakes on your trailer actually engage.With the proportional controller, we don't have to worry about that. If we hit our brakes on our truck, our brakes are going to start being applied and they're going to be applied in proportion to how we're braking in our truck. So, when we hit the brakes hard, they're gonna apply the brakes more heavily. more

7/11/2018 3:17:17 PM

Trailer Brake Controller Installation - 2010 Ford F-150- Video

Speaker 1: Today on our 2010 Ford F150, we're going to be installing the Tekonsha Voyager Brake Controller, part number 39510. To help us get this installed, we're going to be using the Tekonsha Wiring Adapter for Brake Controllers for the Ford F150, part number 22292. This brake controller is going to provide all the braking assist you need when hauling your electric brake trailer. This is going to be an entry-level unit that doesn't have a lot of options but gives you everything you need as far as hauling your railer safely. The Voyager is the most basic model of Tekonsha's line of brake controllers. The Primus is going to offer some more features having an LED display whereas the prodigy models are going to offer an even nicer display and more fine tuning options.This controller provides feedback using the LED on top. more

2/8/2018 7:59:15 AM

Trailer Brake Controller Installation - 2010 Ford F-150 90885- Video

Today on this 2010 Ford F-150 we are going to install a brake controller part number 90885 the Prodigy 2 brake controller. This F-150 has a factory tow package so our connector we are going to plug into is going to be behind the computer port here off towards the center. Maybe but a few inches away at the most. It is stuck into a cap right now so there is a little button that you want to push up and disconnect it. Plug the adapter cord into it and we are going to leave that alone for now. Next we will mount our brake controller to the bottom of the dash and we are going to locate it about right here and we are going to use this bracket that comes with the kit and basically we are going to pull it over to this screw right here and we will just use the screws that came with the kit and drill right into the plastic and it will be just fine. 00:50 more

8/27/2010 1:29:10 PM