2004 Chevrolet Silverado Trailer Brake Controller Installation And Review Videos

Best 2004 Chevrolet Silverado Brake Controller Options- Video

Speaker 1: Today we're going to be taking a look at the best brake controllers available for the 2004 Chevrolet Silverado 1500, 2500, and 3500. Now we chose these brake controllers based on several different factors, mainly ease of use and the experience that we have with them here in the shop, and also what our customers say about them, which ones they like, which ones they have problems with.Here we have our CURT TriFlex. Here's the Tekonsha Prodigy P3. This is an extremely popular brake controller that we carry. The Redarc Tow-Pro Elite. For kind of a curve ball we've got the Prodigy RF. more

8/24/2018 1:12:12 PM

Trailer Brake Controller Installation - 2004 Chevrolet Silverado- Video

Today on our 2004 Chevrolet Silverado 3500 we're going to be installing the Tekonsha Prodigy P3 Trailer Brake Controller, part number 90195. In addition to the brake controller we're also going to be using the Tekonsha Plug-in Wiring Adapter for electric brake controllers for GM vehicles, part number 3015-P. Now here's what our P3 brake controller looks like. We get a couple different options for mounting it. We can use the standard metal bracket style or we can use the metal and plastic combination. This one here will allows you to remove the brake controller when you're not using it, but because it is out of plastic it is not quite as durable as our metal one here. Now this particular vehicle here is a work truck so we're going to go ahead and install the metal bracket to give us a little better chances of the brake controller staying connected onto the lower dash where we'll be putting it. Now that we've gone over the parts of the brake controller, here's the wiring harness that we're going to be using. more

11/5/2014 1:00:06 PM

Trailer Brake Controller Installation - 2004 Chevrolet Silverado 3015-P- Video

Today on our 2004 Chevy Silverado, we'll be installing the Tekonsha Prodigy P2 brake controller, in conjunction with the Tekonsha plug-in wiring adaptor for electric brake controllers for General Motors products, part number 90885-3015P. to begin with, we'll go ahead and locate and area where we want to mount the brake controller. In this particular case, we're going to use a small pocket that's part of the dash, and put two holes up into it, and use the metal bracket that comes with the kit to mount the brake controller. Now to start with, we'll go ahead and hold the bracket up and mark our locations where we need to drill. Now to mount the metal bracket, we went ahead and got a couple machine screws and nuts to go ahead and mount it. These are not supplied with the kit, and you will need to get them separately. more

6/26/2013 8:53:38 AM