Trailer Brake Controller Installation - 2008 Chrysler Aspen- Video
Today, on our 2008 Chrysler Aspen, we're going to be installing the Tekonsha Prodigy P3 Trailer Brake Controller, part number 90195. In addition to the brake controller installation, we're also going to be using the Curt Universal Wiring Kit for Brake Controllers, part number C51500. Here's what our brake controller looks like installed in our vehicle. Let's go ahead and go over a few of the functions of the brake controller. This lever here on the underside is the main override. You can see when I flip it now, there's currently not a trailer connected. Now, I'll go back and plug a trailer into our 7 way plug at the rear of the vehicle. more
9/24/2014 10:45:14 AM
Trailer Brake Controller Installation - 2008 Chrysler Aspen 90885- Video
Audio: Today, on this 2008 Chrysler Aspen, we're going to install a brake controller, part# 90885. This is Prodigy P2 brake controller. To help install this brake controller, we're also going to use part# ETBC7. We're going to start with that part number first. Starting at the back of the vehicle, we're going to install the 7-pole bracket that comes with the kit. We're going to mount it to the bumper on the right side of the hitch. Due to the way the 7-pole connector is manufactured with the 4-pole on the side, we'll have a little more working room if we mount it on that side. We're going to go ahead and hold our bracket up to the bumper structure. We'll mark and drill our holes, and then, we'll go ahead and install some self-tapping screws. more
9/2/2014 5:07:07 PM
