Trailer Brake Controller Installation - 2002 Ford F350- Video
Today, on our 2002 Ford F350, we're going to be installing Tekonsha Prodigy P2 Trailer Brake Controller, Part Number 90885. In conjunction with the brake controller, we'll also be using the Tekonsha Plug-in Wiring Adapter for electric brake controllers, Part Number 3035-P.To begin with, we will go ahead and lower dash panel below the steering wheel by twisting the four corners of the panel and pulling it off. With this removed, we'll go ahead and locate the plug that we will need to plug into underneath the dash.The connector is a gray connector and we will need to take the end of the plug-in wiring adapter and plug into this. You want to make sure it goes in all the way to where you hear it click and lock into place.Next, we'll go ahead and pick out a location to secure our mounting bracket. On this particular vehicle, there was already a brake controller installed before, but we'll go ahead and change out to the new bracket.We'll go ahead and make the connection to the back of the brake controller. Again, you'll notice that there is a clip on the one side and you need to make sure that it's locked into place firmly on the back of the brake controller.We'll go ahead and use the two screws and put the brake controller up into the bracket. more
5/24/2013 10:45:14 AM
