Trailer Brake Controller Installation - 2000 Ford F-250 Super Duty- Video
Today, on our 2000 Ford F250 Super Duty Crew Cab, we're going to be installing the Tekonsha Prodigy P3 Trailer Brake Controller for 1 to 4 Axles, part number 90195. In conjunction with the Tekonsha P3 Brake Controller, we're also going to be installing the Tekonsha plug-in wiring adapter for electric brake controllers for Ford, Lincolns, and Mercury's, part number 3035-P. Now we have our brake controller installed. Now we'll take the manual override button, which is this lower lever here. We pull it over, and notice that it shows no trailer connected. It's because we don't currently have a trailer connected to our 7-way plug. Now, with our trailer plugged in, you'll notice that we have an actual numerical read-out right now. more
11/21/2014 3:22:46 PM
Trailer Brake Controller with Wiring Installation - 2000 Ford F-250 Super Duty- Video
Today on this 2000 Ford F-250 Super Duty we are going to install part number 90885-3035P. The Tekonsha Prodigy P2 brake controller with the adapter cord that will plug into the factory Ford outlet. The first thing we need to do is get access to the port near the panel underneath the steering wheel that we have to temporarily remove. You can simply use a coin to undo the latches. Right here is the port that we need to plug into. That is kind of hard to get the wire harness in there and plug it in so you can use a screwdriver or a trim panel tool like we are using and just pop it up a little bit, get underneath of it and pop it loose so you can get a better angle at it. Take the cord and plug it in and take the cable and route it below and put the panel back into place. 00:55 more
1/19/2011 1:41:41 AM
