Summer Starts Here - Save up to 70%
Trailer Hitch Installation - 2011 Mitsubishi Eclipse - Draw-Tite- Video
Today, on this 2011 Mitsubishi Eclipse, we're going to review and install the Draw-Tite Sportframe Class I 1-1/4" receiver hitch, part number 24754. This is what the hitch looks like when it's installed on our Eclipse. I notice it's very tight up underneath the bumper fascia right here, and it's very close maybe within 1/4", and this is going to be our 1-1/4" opening right here. Look onto the side right here. There's a hole for a hitch pin. This uses a 1/2"-diameter hitch pin or your favorite locking hitch pin. Underneath here, it does come with some safety chain loops right here. This will work with a wide variety of safety chains. more
9/26/2016 1:21:09 PM
Trailer Hitch Installation - 2008 Mitsubishi Eclipse - Hidden Hitch- Video
Today on our 2008 Mitsubishi Eclipse, we will be installing the Hidden Hitch Trailer Hitch, part number 60813, and this is what the hitch looks like on the car. Now, you need some measurements for helping you chose accessories like bike racks or cargo carriers. From the center of the pinhole to the rear bumper, a 6-3/4 inches, and from the center of the pinhole to the ground, is about 10-1/2 inches a ground clearance. Now, we'll show you how to install it. The first thing we'll need to do get started on our installation is to gain access to our trunk. We'll remove the rear carpeting and this rear cardboard floor that covers the spare tire, and then we'll remove the tools that come with the car and the spare tire. Then after the spare tire is out of the way, just pop out this drain plug here. For the next step, we have our first mounting bracket and a carriage bolt. We'll use one that kind of line that up over the drain plug hole. more
5/7/2014 1:43:01 PM
Trailer Hitch Installation - 2008 Mitsubishi Eclipse - Draw-Tite- Video
Today on our 2008 Mitsubishi Eclipse, well be installing the draw type sport frame trailer hitch part number 24754 and this is what the hitch looks like on the car. Well give you some measurements for helping you choose accessories like bike racks or cargo carriers. From the center of the pinhole to the rear bumper is 6-3/4 inches and from the center of the pinhole to the ground is about 10-1/2 inches of ground clearance. Well show you how to install it. The first thing well need to do to get started on our installation is to gain access to our trunk. Well remove the rear carpeting and this rear cardboard floor that covers the spare tire. more
5/7/2014 8:35:23 AM
Filter Videos
Filter Videos
