Summer Starts Here - Save up to 70%
Trailer Hitch Installation - 2007 Mercury Milan - Hidden Hitch- Video
Today in our 2007 Mercury Milan, we're going to install the hidden hitch trailer hitch receiver, class 1 with the inch-and-a-quarter opening, part number 60846. It tucks nicely here behind the bumper structure. And the one thing you see here is actual shank, so it gives your Milan a nice look, just a nice streamlined hitch, and only sticks out to the shank, and that part you need to get to. It is a one-and-a-quarter inch shank here, and does have a half-inch hitch pin hole. If you are pulling a small trailer, you have easy access to the tie-down points for your safety chains. It does have a 200-pound tongue capacity, and a 2000-pound towing capacity. You want to cross-reference that with your manufacturer's specifications for your vehicle. more
5/28/2015 1:41:50 PM
Trailer Hitch Installation - 2007 Mercury Milan - Draw-Tite- Video
Today on our 2007 Mercury Milan, we're going to install the Draw-Tite Sportframe trailer hitch receiver class 1 with an inch and a quarter opening, part number 24775. Here's what our Draw-Tite trailer hitch looks like installed on our Milan. It tucks nicely here behind the bumper structure and the one thing you can see here is the actual shank. So it gives your Milan a nice look, a nice streamline pitch and it only sticks out to the shank and the part you need to get to. It is a one and a quarter by one and a quarter inch shank here and does have a half inch hitch pin hole. If you are pulling a small trailer it will be easy access to the tie down points for your safety chains. It does have a two hundred pound tongue capacity and a two thousand pound towing capacity. more
5/26/2015 3:21:06 PM
Trailer Hitch Installation - 2010 Mercury Milan - Draw-Tite- Video
Today on this 2010 Mercury Milan, we're going to install part number 24865 from Draw-Tite. All right this is what the hitch looks like once it's installed on the Milan. Next we'll go ahead and give you some measurements to help you out in selecting some accessories such as a bicycle rack or a cargo carrier. From the center of the hitch pin hole to the outside edge of the bumper is going to be about 5 1/4 inches. From the top of the receiver opening down to the ground will be about 11 1/2 inches. Now we'll go ahead and show you how the hitch is installed. All right, now first thing we need to do is get our car ready, to do that we need to go ahead and lower the exhaust to get it out of the way so we have some room to work. more
10/30/2014 12:26:15 PM
Filter Videos
Filter Videos
