2011 Nissan Rogue Roof Rack Installation And Review Videos

Malone AirFlow2 Universal Roof Rack Installation - 2011 Nissan Rogue- Video

Speaker 1: Today on our 2011 Nissan Rogue, we're gonna be installing the Malone Airflow Two Roof Rack's with aero bars. These come in 50 inches with part number MPG215 and 58 inches with part number MPG216.This roof rack system is an economical solution with all the features of a premium roof rack system. This will item out your favorite accessories such as cargo baskets, kayak carriers, bike rack and many more. When comparing these to square bars, they're gonna be more aerodynamic to create less wind noise, and the end caps gonna have a nice opening feature and allow you to use T slots in the opening here. There's a rubber strip in the T track that can be compressed when installing your accessories. And re expands to keep out moisture and dirt. more

3/12/2018 2:34:43 PM

Malone SteelTop Universal Roof Rack Installation - 2011 Nissan Rogue- Video

Speaker 1: Today on our 2011 Nissan Rogue, we're going to be installing the Malone steel top roof rack with square bars; which comes in 50 inches with part number MPG201, and 58 inches with part number MPG202.This Malone roof rack system is going to allow you to carry accessories on your factory raised side rails. These will be suitable for holding your favorite accessories, such as kayak carriers, cargo baskets, bike racks, and many more.It has study square steel bars with a vinyl coating to protect it. They carry a 165 pound weight capacity, although it is recommended to check your vehicle's owner's manual to ensure that you're not going to exceed its roof's capacity.There's an end cap on each bar to keep out dirt and debris, to prevent rust and corrosion on the inside. There's locking end caps for that added security for not only your bars, but your accessories on top. Two keys are included in the kit, and all the end caps locks match. The nylon end caps are going to be weather resistant to protect it against the elements and UV rays.They're going to add about one and three-quarter inches to the height of your factory raised rails.We've already got the rear installed. more

3/5/2018 3:58:34 PM

Rhino Rack Roof Rack Installation - 2011 Nissan Rogue- Video

Today on this 2011 Nissan Rogue we are going to be installing a Rhino Rack SXB roof rack system with Aero crossbars. After we have assembled the crossbars, we can begin mounting them on our vehicle. First, we will take the front crossbar and loosely place it into position. First we will make sure that the crossbar is overhanging the same amount on both the driver side and passenger side. And then we will position it so that it is running perfectly perpendicular to the vehicle. Once we have the first crossbar in position, we can begin tightening it down. As we tighten this Allen head bolt, not only will the clamp begin to grab on to our side rails but it will also tighten the crossbars to the clamps. We will move back and forth from the driver side to the passenger side to tighten down the rack evenly. Once we have our front crossbar installed, we can go ahead and install our locking end caps. The locking end caps not only help us seal the end of our crossbars. But because they are locking, they also protect our rack from being stolen. 1:03 more

9/7/2011 12:18:47 PM

Thule Crossroad Roof Rack Installation - 2011 Nissan Rogue- Video

Today on this 2011 Nissan Rogue we are going to show you how to install a Thule Crossroad roof rack system. The Thule Crossroad system is designed to attach to vehicles with factory raised side rails like we have on our Rogue. Once we have the crossbars assembled, we can place them on top of our side rails. Make sure that they are spaced evenly on both sides with the side rails so that the crossbars run perpendicular to your vehicle. Once you have the front crossbar in place, you can use the integrated tool on the end cap to tighten them down. The Crossroad feet attach to the factory side rails using a rubber coated steel band. This band will strongly and securely grip your side rails but the rubber coating will help protect them as well. As we tighten down the clamp on the Crossroad foot, it also tightens the crossbar into the foot. We will move back and forth from the driver side to the passenger side to make sure the rack tightens down evenly and we do not lose our positioning. 0:57 more

9/6/2011 10:13:49 AM