Hopkins Plug-In Simple Wiring Harness Installation - 2011 Ford Van- Video
Today on this 2011 Ford van, we're going to review and install the Hopkins Plug-In Simple Wiring Harness, part number HM11140665. This is what your wire harness looks like when it's installed on our van. This is a great component to add to your van if you don't have an existing four pole flap, because a lot of these vans do the port that's underneath the vehicle that's just not being used. Also, if the original equipment four pole has gotten corroded beyond use, you can also replace it with this part number as well.Let's cover what you get when you order this part number. First off, this is our wire harness right here that has a side that plugs into the factory port and your four pole flap on the other side. This whole wire harness is gonna be 70 inches long overall. more
12/12/2018 3:47:13 PM
Tekonsha T-One Vehicle Wiring Harness Installation - 2011 Ford Van- Video
Speaker 1: Today on our 2011 Ford van, we're going to review and install the T1 vehicle wiring harness from Tekonsha, part number 118260. This is what our four pole wire harness looks like once installed on our van. Just by itself, you could use a cap to help hold it in place. This is all one piece unit. It has traditional four pole flat on the end with built in cap to cover it, we're not using it. The whole assembly's about 50 inches long. more
12/5/2018 9:42:29 AM
Best 2011 Ford Van Trailer Wiring Options- Video
Speaker 1: Today we're going to be taking a look at the best wiring options for your 2011 Ford Van. We're going to have the Hopkins here, along with the Tekonsha. Both these wiring kits are going to be for our vans that do not have a factory seven-way at the back. If you do have a factory seven-way connector at the back, we do have a few options that'll either replace your broken one or upgrade it.Here we have the Hopkins, which is not only going to give you a seven-way connector, but it's also going to give you a four-pole flat connector, which'll be nice if you have multiple trailers that you tow. It's going to come with a mounting bracket and hardware. That way we can easily mount it at the back of our bumper.Here we have the EZ Connector, which is actually going to use magnets to hold the connector in place so we're not going to have to worry about any broken blades or bent pins. more
6/28/2018 10:57:11 AM
Trailer Wiring Harness Installation - 2011 Ford Van- Video
Today, on this 2011 Ford Van E-350, we're going to show you Curt T-Connector Vehicle Wiring Harness with a 4-Pole Flat Trailer Connector. Part number C56020. With this part number, this is what you get. A wire harness here, this T-connector goes over to the passenger's side with the green wire, driver's with this yellow wire. We've got plenty of length of wire that comes up to the 4-pole flat. The kit also comes with zip ties to help secure the wires. more
8/8/2015 11:46:23 AM
