Best 2018 Ford Transit T250 Trailer Wiring Options- Video
Hey everybody, Ryan here at etrailer, and today we're gonna be taking a look at our best trailer wiring options for our 2018 Ford Transit t250. Today we're gonna be looking at four different wiring options here. And these three are all going to have a four way flat type connector. This one is going to have a seven way type connector. So with that being said let's kind of run through each one. Over here we're going to have the Hopkins, right here we're going to have the CURT, and this kit is a Tekonsha, as well as the seven way kit, this is Tekonsha as well. more
2/23/2021 3:58:33 PM
Trailer Wiring Harness Installation - 2018 Ford Transit T250- Video
Today on our 2018 Ford Transit T250 we're going to be taking a look at and I'm going to show you how to install the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector. This is what our wiring looks like when it's installed. It's going to give us all the proper lighting functions to safely tow our trailer. It's going to give us both turn signals, our running lights, and our brake lights. It's going to have an added dust cap to help keep any dirt and debris from getting in our connections. And when not in use, it can double as a holder to help our wiring from dragging. more
1/31/2019 3:52:12 PM
Best 2018 Ford Transit T250 Trailer Wiring Options C56327- Video
Speaker 1: Today we're gonna take a look at the best wiring options for your 2018 Ford Transit T250. So here we're gonna have the Curt Four Pole Wiring Kit, and here we're gonna have the Tekonsha Four Pole Wiring Kit, and then finally on the end here, we're gonna have the Tekonsha Seven Pole Wiring Kit.Now, each one of our kits does have some slight differences. Let's go take a look at some of them. Each one of our kits is gonna use a power taillight converter to convert the signal from our taillights to have the proper signal going out to our trailer, and as well protect our vehicle if anything may happen on the trailer end and prevent any feedback.As you can see here on our Curt and our Tekonsha, we're gonna have some wires coming out of our converter boxes. But if you notice, on the Tekonsha here, it's gonna have this epoxy-type material. That epoxy material's actually going to fill the entire box and keep all the circuitry secure and it's gonna be a little bit more resistant to any kind of rattling and any kind of damage that may be caused when it's mounted.Now these are powered converter boxes. more
1/15/2018 7:58:42 AM
