Best 2011 Cadillac SRX Trailer Wiring Options- Video
Speaker 1: Today we're going to be taking a look at the best custom fit vehicle wiring options for your 2011 Cadillac SRX. To determine which wiring harness you're going to need, you're going to need to know if your SRX has the tow package or not. Now most likely it will, and there's going to be a connector behind the bumper in the center that our new harness is going to plug directly into.Here we have our Tekonsha, which is going to plug directly into the factory tow package. It's going to be an extremely easy connection. We're just going to have to take the cover off and plug our new wiring harness in, and then take the zip ties and tie up the excess wire. It's going to provide us with a four-pole flat trailer connector, giving us our taillights, turn signals, and our brake lights. more
8/9/2018 2:32:12 PM
Trailer Wiring Harness Installation - 2011 Cadillac SRX- Video
Today in our 2011 Cadillac SRX we'll be installing the Curt 4-Pole Flat Wiring Connector, part number 56096. Now for this application, it's highly recommended to install your wiring before you install the hitch because once you put the hitch in place, it will cover up your access to get to the manufacturer's tow port that we'll need to connect to. First, we'll go ahead and remove the rear fascia cover. To remove the rear fascia cover, there's two screws that we'll go ahead and remove and then pull down on the fascia cover, gently releasing the fasteners underneath. We'll go ahead and set these aside as they will not be reinstalled as the hitch will take it's place once it's installed. Next we'll go ahead and locate the manufacturer's tow port that's secure to the back of the bumper structure. more
11/26/2013 9:38:22 AM
Trailer Wiring Harness Installation - 2011 Cadillac SRX 118259- Video
Today on our 2011 Cadillac SRX well be installing the Tow Ready replacement OEM tow package wiring harness, part number 118259. To install the wiring well be connecting with the manufacturers plug. Note that this wiring install is a replacement of the OEM tow package wiring harness with a four pole flak. When installing your wiring in conjunction with the hitch its recommended to install the wiring first as the hitch will block your access to the manufacturers connector. To install the wiring well first remove the manufacturers weather cap by pulling back on the connector lock and removing the cap. Then we can take our new wiring harness and plug in line with the manufacturers connector. more
12/21/2012 1:05:42 AM