Draw-Tite Max-Frame Trailer Hitch Installation - 2011 Audi Q5- Video
Rob: Rob here at etrailer.com and today you're going to be taking a look at the Draw-Tite class three custom fit trailer hitch receiver on our 2011 Audi Q5. Now here's what our hitch is going to look like once we have it installed. It's going to have a really clean almost factory appearance to it, because the cross tube is going to be completely hidden behind the bumper and all we're going to see is that receiver tube sticking out.Our hitch is a class three, so it's going to give us that two inch by two inch receiver tube opening. And it is going to have the widest variety of options when it comes to accessories. Whether we want to tow a trailer, we can put a ball mount in there. Make some room on the inside of our Audi by putting some of the gear on a cargo carrier or if we want to take a bike ride, we can put a bike rack in there, carry a couple bikes. more
7/11/2019 12:07:25 PM
Best 2011 Audi Q5 Trailer Hitch Options- Video
Today we're going to be taking a look at the best hitch options for your 2011 Audi Q5. Up top we've got the CURT, part number C13136. Then on bottom we've got the Draw-Tite, part number 75940. The first obvious difference between these two hitches is that, as you can see, they look very different from each other. Although they look very different and mount up differently, they're going to come out in about the same position on the vehicle. On the CURT, when it's mounted on the vehicle, you are going to be able to see this crosstube a little bit but it's also tucked back underneath the vehicle far enough that it's not going to be very noticeable. You should have enough room with most of your class three accessories without having to worry about them hitting the rear of your vehicle. more
10/3/2016 10:04:09 AM
Trailer Hitch Installation - 2011 Audi Q5 - Curt- Video
Today on this 2011 Audi Q5, we're going to show you the Curt Class III two-inch receiver hitch, part number C13136. All right, this is what the hitch looks like when it's installed on our Audi Q5. First off, you can see the round tube body assembly and the receiver hitch. Now, it sits underneath the bumper cover here because the structure for the bumper is right above this, okay, so we really we have not much room for it. Okay Here's a two-inch opening here. It's got a nice rounded collar for reinforcement, and it uses a five-inch hitch pin in this hole right here or your favorite locking pin. more
6/26/2015 2:44:41 PM
