Tekonsha T-One Vehicle Wiring Harness Installation - 2013 Lincoln MKX- Video
Today on our 2013 Lincoln MKX we're going to be taking a look at and showing you how to install the Tekonsha T1 Vehicle Wiring Harness with a four pole flat trailer connector. This wiring is going to provide us with all of the necessary lighting functions to not only be safe but legal. We're going to have our tail or running lights, our turn signals, and our brake lights. Now the power output is going to be more than sufficient enough to operate all your trailer's lights correctly. It's also going to have a nice dust cap, which will not only keep your terminals protected and corrosion free, but it also serves as a holder for when you're not using your four way. If you would rather have this permanently mounted in a bracket somewhere in this area, you can pick a bracket up at etrailer.com.Now that we've gone over some of the features, let's get it installed together. more
3/22/2019 10:57:51 AM
Trailer Wiring Harness Installation - 2013 Lincoln MKX- Video
Today on our 2013 Lincoln MKX, we'll be installing the Curt T-connector vehicle wiring harness, part number C56121. Now to begin our install, we'll open up the rear hatch. Then, we'll need to remove the fasteners to secure the rear tail light assembly. There are two fasteners on each side. Once we remove the screws and set them aside, we'll then pop the tail light assembly out of its position being careful not to break the alignment tabs underneath. Next, we'll go ahead and press on the wiring connector lock so that we can remove the wiring harness from the back of the tail light assembly. We will set the tail light assembly aside. Now, we'll go ahead and repeat the same process on the other side. more
5/30/2014 1:37:31 AM
