Curt T-Connector Vehicle Wiring Harnes Installation - 2011 Honda Odyssey- Video
Rob here at etrailer.com and today you're going to be taking a look at the Curt T-Connector vehicle wiring harness with the 4-Pole flat trailer connector, on our 2011 Honda Odyssey, and here's what our wiring is going to look like once we have it installed, it is going to provide us with a 4-Pole flat trailer connector so we can have all the lines required to get us down the road safely when we're towing a trailer, like our tail lights, our turn signals and our brake lights. Now our wiring is going to have a dust cover on it, so it's going to help protect any kind of dirt and debris from getting inside, making sure that our connectors are going to be clean, however it is designed to stay on the inside of the car until we're ready to use it. So we can just simply open up our hatch.We can wind up all of our excess wire and we can keep it back here in our cargo area. Then whenever we do want to use it, we'll just drop our wire down so we got enough room to reach our hitch. Just want to make sure that the wire is on the Weatherstripping, but away from the actual latch mechanism itself. The Weatherstripping is going to have enough give to where it's not going to damage the wire. more
6/24/2019 2:27:19 PM
Best 2011 Honda Odyssey Trailer Wiring Options- Video
Today we're going to be taking a look at the best wiring options for your 2011 Honda Odyssey. Here we have our Tekonsha, part number 118521. Here in the middle we have our Hopkins, part number HM11143114. Finally, here on the end here we have our CURT, part number C56118. Now regardless of the kit you choose, they're all going to end up with the same. We're going to have a four-pole flat on the inside of our vehicle, and it's going to stay there until we're ready to use it. Simply just run the wire down, and the door will shut on it, and we can hook up our trailer. more
2/27/2017 10:27:13 AM
Trailer Wiring Harness Installation - 2011 Honda Odyssey- Video
Today on this 2011 Honda Odyssey were going to install part number 118521 from Tow Ready. The first thing you need to get inside the vehicle. All right. Now you have to take the seats and get them out of our way. I like to remove the threshold right here. We remove this fastener here and theres one on the other side. more
12/8/2011 2:28:48 PM
