Best 2010 Honda Fit Trailer Wiring Options- Video
Speaker 1: Today we're going to be taking a look at the best wiring options for your 2010 Honda Fit. Here we've got our best options so you can have a 4-pole connector, to provide the lights for your trailer.You've got the Tekonsha, part number 118420 and the Curt, part number 56011.The main differences between these two harnesses are the shape of the control box and their power output.The Tekonsha's control box is going to have all the wiring coming out of the bottom. This is great because it can be mounted in a way that water can't pool on the bottom to enter inside the box. And this control box also has a parting material that goes all the way throughout the box to keep your wiring secure and connected to the circuit board and keep any moisture from entering inside causing corrosion. Which gives this one a little bit more robust and durable lifetime.While the Curt has it's 4-pole connector coming out one side and the rest of it's vehicle wiring coming out the other side. This can be a benefit in some ways, by separating them. more
8/10/2018 11:42:12 AM
Trailer Wiring Harness Installation - 2010 Honda Fit- Video
Today this 2010 Honda Fit, we're going to install part number C56011 from Curt. This is going to be Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector. Now to do our install, we're going to have to get our car ready. Take the floor covering, pull this back and out of the way. Right, now this is our threshold we have to loosen up. It does help to pull the seal away just a little bit to work with it. Go ahead and remove this. more
11/4/2014 4:23:21 PM
