Bargman Custom Fit Vehicle Wiring Harness Installation - 2018 GMC Sierra 2500- Video
Hi, I'm Shane with etrailer.com. Today, I'm going to walk through how to install the Bargman Gooseneck Fifth Wheel 90 Degree Wiring Harness on our 2018 GMC Sierra 2,500.Adding wiring like this, in the bed of your truck, is going to allow you when you're hooked up your fifth wheel or gooseneck, to plug it in inside the bed. You're not going to have to take your cord, hang it over top of your tailgate, and plug it in down by your bumper.It's going to give you your seven pole connection, casing is a very durable plastic casing, so we're not going to have to worry about damage. We're going to have a spring loaded lid. On the underside of the lid, it's going to have a foam ring on it, and what it does, it seals right around here, to keep any dirt, debris, and moisture from getting onto our connections.It's going to plug directly into our factory seven pole plug on the back of our vehicle. And if you notice right here on the lid, this is going to tell us what each one of our pins or each one of our wires are doing inside of the wiring harness.This wiring harness is also going to come with an extension plate and where this goes, it actually would mount right behind the backside of the plug here, to give you that added space in case the 90 degree section of your wiring makes contact with the outside of the bed.Now that we've gone over some of the features, let's walk through the installation together. more
8/21/2019 4:02:27 PM
Fifth Wheel and Gooseneck Wiring Harness Installation - 2018 GMC Sierra 2500- Video
Hi there, GMC Sierra owners. Today on our 2018 GMC Sierra, we're going to be installing Draw-Tite's fifth wheel or gooseneck wiring harness. This wiring harness is going to put your seven-pole connector in a much more convenient location for your fifth wheel or gooseneck trailers. Often, your fifth wheel gooseneck trailer, the cable that comes with it isn't long enough to reach over the back of the bed of your truck to plug into your existing factory connector. And if it is long enough, it's usually just barely long enough and then you've got a cable rubbing up against the outside of your tailgate potentially scuffing up the paint.This keeps everything in your bed, doesn't put any stress on the length of your cable, and your factory seven-pole connector still functions along side with this one. The seven-way connector has a spring-loaded cover with rubber gasket on the inside to keep out any dirt, debris, and moisture, ensuring a long lasting connection.You will have to drill a hole to mount your seven-way connector. more
4/30/2019 12:28:41 PM
Hopkins Endurance Fifth Wheel Wiring Harness Installation - 2018 GMC Sierra 2500- Video
Speaker 1: Today on our 2018 GMC Sierra 2500, you're going to be taking a look at, and I'm going to show you how to install the Hopkins Endurance Fifth Wheel Gooseneck 90 degree wiring harness for 7-pole plug, part number 41157. This is what our 7-pole looks like when it's installed. This is going to allow you to maintain your 7-pole, your factory 7-pole plug on the bumper of the truck, while adding one to the bed of the truck. Now, this is going to be good for when you're pulling your fifth-wheel or gooseneck. You don't have to run your electrical wire over the top of your tailgate, and hook it into your bumper. It's going to stay nicely all inside of your bed.This plug's gonna have a nice spring loaded lid. more
4/2/2018 4:09:18 PM
