Trailer Wiring Harness Installation - 2014 GMC Savana Van- Video
Today, in our 2014 GMC Savana Van we'll be taking a look at and installing the Curt T-Connector Vehicle Wiring Harness with 4-pole Flat Trailer. Part number 55540. When we're ready to use it, all we need to do is pull it out the back, run it down between the bumper, and out the bottom to connect to our trailer by our receiver. We can close up the doors since the weather stripping is thick enough that it won't damage our wires. Now, I'll go ahead an open up that rear hatch of our vehicle to start our installation. First thing we're going to do is locate our wiring adapter from the factory. If you look at the T-connector on the Curt, it's going to have the same style connector. more
1/28/2016 5:52:22 PM
Trailer Wiring Harness Installation - 2014 GMC Savanna Van- Video
Today on our 2014 GMC Savannah van we will be taking a look at, and installing the Tow Ready T1 Vehicle Wiring Harness for a four pull five Trailer connector, part number 118392. Here's what our wiring harness looks like once it is installed on the vehicle. Easy plug and play installation. You are going to have a four pull flat trailer connector, and a cover to keep out all of the dirt, grime and debris. This is going to offer your tail, your stop and your left and right turn signals. First thing we are going to need to do is open up the rear hatch or compartment of our vehicle. You are going to have your green side, that is going to be your passenger side, and your yellow and brown side with your ground wire, that will be the driver side. more
1/27/2016 11:51:06 AM
