Trailer Wiring Harness Installation - 2013 Chevrolet Silverado- Video
Speaker 1: Today on our 2013 Chevrolet Silverado, we're going to be installing Bargman's Fifth Wheel/Gooseneck 90-Degree Wiring Harness with the Seven-Pole Trailer Connector, part number 50-97-410.This truck bed mounted trailer connector is going to be ideal for hooking up your gooseneck or fifth wheel trailer. It's going to be located right in the back so once you've got your connection, you can just plug your trailer right in. You don't have to worry about the cable being too short, not draping over the back. It'll be nice and easy and protected.This is going to provide your trailer with all the necessary signals. This includes the tail lamps, brake lamps, left turn signal and right turn signal. Then, if your vehicle's wired up, you can also have reverse lamps back there as well as a charge line. more
9/25/2018 7:47:11 AM
Trailer Connector Socket Installation - 2013 Chevrolet Silverado- Video
Today on our 2013 Chevrolet Silverado we're going to show you how to install the Hopkins Pollak 7 and 4-pole trailer connector socket with mounting bracket. This is the vehicle side. Part number is HM40975. Here's what the line looks like once you get it installed. Really nice, clean setup. We've got our 4-pole on this side. Our 7-pole is going to be on this side. more
6/19/2015 9:37:16 AM
Fifth Wheel Wiring Harness Installation - 2013 Chevrolet Silverado- Video
Today on this 2013 Chevrolet Silverado CrewCab, we're going to install part number 54701-003. This is a 5th-wheel and gooseneck 90-degree wiring harness with 7-pole plug. The first thing we need to do is find a location for it. This is largely personal preference. You can mount it pretty much anywhere in this area right here up towards the front of the truck as well. The 90-degree angle here makes it a little bit shorter than most normal hard wired connections, so it gives it more flexibility as you put it in a narrow spot if you'd like. In this case, we'll put it next to the tailgate area. Here's your tailgate. more
11/3/2014 3:39:53 PM
Fifth Wheel and Gooseneck Wiring Harness Installation - 2013 Chevrolet Silverado- Video
Today on our 2013 Chevy Silverado we'll be installing the Draw-Tite 5th Wheel Gooseneck Wiring Harness with seven blade connector, part number 20110. To begin our install we'll first go ahead and locate where we'll be mounting our new seven blade connector. Because on this application we have a storage box on the driver's side, we're going to put our seven blade connector here on the passenger's side. For this application we're going to mount it here above the cargo hook at the recess of the pickup bed. To mount it we'll need to drill out a two inch hole. We'll make our pilot hole first and then we'll take our pole saw bit and drill out the larger two inch hole. more
9/12/2014 4:46:04 AM
Trailer Wiring Harness Installation - 2013 Chevrolet Silverado HM48420- Video
Today in our 2013 Chevy Silverado, well be installing the Hopkins Endurance 6-Pole Trailer Connector Socket part number HM48420. This will be in conjunction with the Pollak 5th Wheel and Goose Neck Trailer Connector Wiring Harness part number PK11932. To begin our install, well take our Hopkins 6-Pole and make sure we have a hole saw large enough so that the 6-Pole can be mounted in our bedside. Were going to mount it about right here, so well go ahead and take our hole saw and drill a hole in the bed liner and side. Now we can take our wiring harness and feed it from underneath up and out the free drilled hole. Once we feed it through, well go ahead and pull it out so we can work with the end. Typically we would install a seven blade end that would connect to this wiring harness, but because we need a 6-pole trailer connector to connect to our trailer end, were going to go ahead and remove each one of these connectors. more
8/5/2014 11:04:11 AM
Hopkins Endurance Fifth Wheel Wiring Harness Installation - 2013 Chevrolet Silverado- Video
Today on our 2013 Chevy Silverado we'll be installing the Hopkins Endurance fifth wheel and gooseneck 90 degree wiring harness, part number 41157. To begin our install we'll first locate where we're going to mount the new 7-pole connector in the pickup bed. For this application, we'll be doing it behind the driver's side wheel well. Using our hole saw bit, we'll go ahead and cut out the hole for our 7-pole plug. With our hole cut out, we'll then go ahead and take the 7-pole end and route it up underneath the vehicle out the hole we just created into the pickup bed. Once we have our wire routed, we'll go ahead and take some of the dielectric grease provided with the install kit and put it on the end of the wiring connector. Then we can go ahead and take the wiring connector and secure it to the back of the 7-pole connector. We'll go ahead and check to make sure it locked in place. more
2/6/2014 11:43:13 AM
Pollak Twist-In Trailer Connector Installation - 2013 Chevrolet Silverado- Video
Today well be installing the twist-in 7-pole RV-style trailer connector for Chevy and GMC vehicles, part number PK11916 on our 2013 Chevrolet Silverado. Alright, to begin our installation, were going to start at the rear of the vehicle installing the 7-pole socket. First, we want to remove the 7-pole factory socket. To do this, we want to make sure that we have the tab pushed in. This allows us to twist the socket and pull it away from the bumper for easy removal. We need to remove the lock at the back that holds the cap on. more
6/18/2013 4:44:59 PM
Today on this 2013 Chevrolet Silverado we're going to install part number PK11893-11932. Our first step is to go ahead and install the wires to the socket that will eventually go into the back of the seven pole connector. We'll go ahead and install the wires as follows according to the instructions. Our wires just push into place and the individual sockets are labeled, so number one will get the red wire, number two will get the white wire, number three will get the blue wire, and four will get the green wire. We're going to skip to number seven, the yellow wire, and put that in the number seven socket, that way we'll have room. Five will have the black wire and socket six will have the brown wire. more
3/3/2013 7:50:51 PM
