Best 2013 Acura MDX Trailer Wiring Options- Video
Speaker 1: Today we're going to be taking a look at the best wiring options for our 2013 Acura MDX. Our best two options are going to come from CURT and Tekonsha. They're both going to be similar in their functions, but there are going to be some differences in them that might make one a little bit better suited for your needs.At first glance you'll notice that this one here by CURT does have a fuse, so this one will be fuse-protected, where our Tekonsha's not. It'll just have the internal module protection. The CURT also has internal module protection, but having that extra fuse is kind of nice just in case you do have a short that the module doesn't catch. It won't cause any damage to the component. more
10/29/2018 1:37:14 PM
Trailer Wiring Harness Installation - 2013 Acura MDX- Video
Speaker 1: Today in our 2013 Acura MDX we're going to be installing CURT's T-Connector Vehicle Wiring Harness with Four Pole Flat Trailer Connector, Part Number C56038. This wiring harness is going to live inside the vehicle so it's going to be free from the corrosive environment that's outside.You can access it by lifting up on your storage compartment and it's tucked away nicely here on the side. When you're ready to use it you can simply unwind it, drape it out over the back and close your liftgate.The liftgate's going to pinch it between the weather stripping. This will hold it in place, but won't cause any damage to the wiring.This Four Pole Flat Connector is going to provide you with all the necessary lighting. This includes your left turn signal, right turn signal, tail lamps and brake lamps. This will keep you DOT compliant in all states.Also included with it, you'll get a dust cap. more
9/26/2018 10:43:06 AM
Trailer Wiring Harness Installation - 2013 Acura MDX 118424- Video
Today on our 2013 Acura MDX, we're going to be taking a look at and showing you how to install the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, part number 118424. Once our wiring is fully installed, it will be hidden, and it's going to stay in this panel underneath until we're ready to use it. Then we can drop our wire down, just making sure we stay away from the latch. And then we can close our hatch, and it'll be right here when we're ready to hook up. Now, we're going to have a 4-Pole Flat Trailer Connector on the end of our wiring, and it's going to give us all the necessary lights, such as our clearance lights, brake lights, and turn signals, so we can go down the road safely. Now, the installation is very straightforward. We're going to plug into an existing port on our vehicle, and we're going to have to make one ground connection. more
6/27/2017 3:27:27 PM
