Trailer Brake Controller Installation - 2004 Ford Expedition- Video
Today on our 2004 Ford Expedition, we'll be installing the universal kit for trailer break controller 7 way RV and 4 way flat with 10 gauge wires. Part number ETBC7. This vehicle already has a 4 way flat installed on the back. We're going to go ahead and do a quick test to make sure everything's working fine here. Now that we've done that, we're going to go ahead and mount our bracket. We'll need to mount the bracket that will hold the 7 and 4 way. Now because this has a factory hitch on it, there's a little tab here that the 4 flat used used to sit up in. we're going to go ahead and drill a couple small holes to attach our bracket that holds the 7 and 4 way to the factory 4 way bracket that's part of the hitch. We'll go ahead and use a paint marker and mark our holes, then we'll drill the holes on the bracket on the hitch, followed by drilling the on the bracket that hold the 7 and 4 way. Once that's done, we'll go ahead and use 2 of the bolts, washers, lock washers and knots that come with the kit to hold it in place. Next we'll go ahead and attach our 7 and 4 way plug to the bracket we just installed. more
1/23/2014 4:08:17 AM
