Trailer Wiring Harness Installation - 2011 Toyota Sienna- Video
Today we will be working on a 2011 Toyota Sienna. We will be installing Tow Ready T-one connector part number 118498. We are going to start by accessing the rear cargo area of the van. And we need to remove both taillight assemblies. They are each mounted with two 10 millimeter bolts. You can see this gives us access to the rear taillight wiring. I am going to go ahead and disconnect the lens from them now. On each connection, there is a small locking tab that must be depressed before disconnecting. I am going to go ahead and set my taillight lens assembly aside for now. We will reinstall that later. Now I am going to go repeat the same process on the passenger side. Next we want to remove the three cargo hooks so that we can remove this rear threshold. I am going to repeat the same process for the next two. Now that we have our cargo hook hold downs removed, we can go ahead and remove the rear trim panel. We will set that out of our way. You can see it gives us access to route our wiring from the driver to the passenger side. 0:55 more
8/31/2011 12:41:29 PM
