Hopkins Plug-In Simple Wiring Harness Installation - 2013 Land Rover Evoque- Video
Hey everybody. Ryan here at etrailer.com. Today on our 2013 Range Rover Evoke, we're going to be taking a look at and showing you how to install the Hopkins Simple Plugin Wiring Harness for factory tow package. That's going to have a four pole flat connector. This is going to provide you with the signals you're going to need to properly operate your trailer lights.This is going to keep your mind at ease knowing you're not only safe, but also legal. And other motorists on the road are also going to appreciate the fact that they're going to know what your intentions are as you're towing a trailer down the road.One of the things I really like about this kit is that it's going to be simple plug and play. more
4/30/2019 12:17:50 PM
Curt T-Connector Vehicle Wiring Harness Review - 2013 Land Rover Evoque- Video
Today on our 2013 Land Rover Evoque we're going to be taking a look at and installing a Curt T-connector vehicle wiring harness, part number C56159. So here's what our wiring looks like when it's fully installed. It's going to give us a four pole flat, which is going to allow us to hook up to our trailer and have all the required lights going down the road such as our clearance lights, turn signals, and brake lights. When you're not using your wiring, you can take your dust cap loop it through your hitch right here, and not only will it keep our four pole protected against all the elements, but it will also keep it from dangling and hitting the road. Now this is a very straightforward installation. We're just going to have one plug that we're going to plug into our factory harness, and then we're going to route our four pole to our hitch. Now let's show you how we get it installed. Now to begin our installation we're going to need to come to the back driver's side of our vehicle. more
6/29/2017 4:42:44 PM
Trailer Wiring Harness Installation - 2013 Land Rover Evoque- Video
Today, on our 2013 Land Rover Evoque, we're going to be taking a look at and showing you how to install the T1 vehicle wiring harness, part number 118624. Here's what our wiring looks like when it's fully installed. It is going to stay on the outside of the vehicle at all times. We're just going to keep it attached here with our dust inaudible 00:00:21 cover, that way it's ready whenever we're ready to tow. Now, our wiring's going to provide us a four pole flat, and all the lights necessary when driving down the road with a trailer, such as your clearance lights, brake lights, and turn signals. Now, the installation of this is very straightforward. more
6/19/2017 10:22:31 PM
Best 2013 Land Rover Evoque Trailer Wiring Options- Video
Today on our 2013 Range Rover Evoque we're going to be taking a look at the best wiring options available. The two best wiring options we're going to be taking a look at today, first one is the Curt and that's part number C56159. The second one is going to be the Tekonsha part number 118624. Both are going to provide you with a four pole flat connection at the rear of your Evoque, and both are going to plug into your factory tow package connection at the driver's side rear. Now that's located in the corner here just above the exhaust on your driver's side. Then finally once you plug them both in, you'll have to find a suitable ground point for your ground wire. All the hardware is included to do that. more
2/27/2017 10:28:05 AM
