Best 2014 Chrysler Town And Country Trailer Wiring Options- Video
Hello everybody, Clayton here at etrailer.com. And today we're going to be taking a look at the best trailer wiring options for your 2014 Chrysler Town & Country. As you can see here we have three different options for you to look at. We have one from Tekonsha, one from Curt, and one from Hopkins. Now we're ready to look at some of the differences between our kits here, starting off with our Hopkins. There's not going to be any gel coating to protect the inside of our module. more
3/17/2021 1:28:29 PM
Hopkins Plug-In Simple Vehicle Wiring Harness Installation - 2014 Chrysler Town and Country- Video
Hey everybody. How's it going Clayton here at etrailer.com. Here at eTrailer we install, test, and review a lot of different products to help you as a customer make a more educated decision before your purchase. Today we're going to be working on a 2014 Chrysler Town & Country. We're going to be taking a look at and I'll be walking you through how to install the Hopkins Simple Plug & Play 4-Pole Wiring Harness. This is what our 4-pole harness is going to look like installed. more
3/12/2021 1:14:21 PM
Curt Wiring Harness Installation - 2014 Chrysler Town and Country- Video
Speaker 1: Today on our 2014 Chrysler Town and Country, we're gonna be installing Curtz' T-Connector Vehicle Wiring Harness with four pole flat trailer connector. Part number C56331. This 4 pole flat trailer connector's gonna provide you with all of the necessary lighting. This includes your left turn signal, right turn signal, tail lamp and brake lamps. So you'll be DOT compliant in all states.This harness has it's own separate control module that's going to tap into your existing rear tail lamps to get the signals, and it'll provide those signals from the module to your connector. What's nice about this is that that module has its own fuse-protected circuit, so if there's any faults on your trailer such as a short, it'll only affect the circuit going to your module, and not anything on your vehicle.It also has an included dust cap. more
9/25/2018 7:47:35 AM
Trailer Wiring Harness Installation - 2014 Chrysler Town and Country- Video
Today in a 2014 Chrysler Town & Country, we're going to show you a T1 vehicle wiring harness with 4-pole flat trailer connector from Tow Ready, part number 118534. We've got our parts laid out from the box, so we'll do a little bit of show and tell. First off, what color are the lower components and the ends The T-connector with the yellow wire here, goes to a connection point that's located behind driver side tail light. The T-connector with the green wire, goes over to the same connection over on the passenger side. We have a white wire with a ring terminal. That goes through sheet metal for ground. Now this black wire here, gets connected to a 12 volt power supply, so it powers our module which copies a signal that comes from our other 2 connection points. more
4/28/2015 12:47:15 PM
Trailer Wiring Harness Installation - 2014 Chrysler Town and Country C56150- Video
Today on our 2014 Chrysler Town and Country, we'll be installing the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, part number C56150. To begin our install, first we'll open up the rear hatch and locate the fasteners that secure the rear taillight assemblies. We'll remove the fasteners and then remove the taillights. To remove the taillights, we'll simply pull them out towards the rear of the vehicle, releasing the fastener alignment pins underneath. Then to remove the taillight assembly, push up on the read locking tab to release it then press on the connector lock that remove the wiring harness from the socket. We'll set the taillight aside, move over the passenger side and repeat the same process. Now with both taillight assemblies removed, we'll go and take the new wiring harness and the yellow and brown wire connector, plug it in to the manufacturer's wiring on the driver's side. Next we'll take the 4-pole connector and green wire connector and feed it down between the bumper cover and via the vehicle. This will come out down underneath the vehicle where we can then go ahead route the green wire connector over to the passenger side and the 4-pole connector towards the center of the vehicle and ultimately to the hitch. more
9/2/2014 2:52:29 PM
