Curt T-Connector Vehicle Wiring Harness Installation - 2012 Chevrolet Silverado- Video
Today on our 2012 Chevrolet Silverado 1500 we're going to be taking a look at it and showing you how to install the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package with a 4-Pole Flat Trailer Connector. Now what's really nice about this wiring is it's going to literally plug right into our factory 7-way. That's going to not only allow us to have a 7-way plug, but also a 4-pole.Another thing I like is that the wiring is actually going to come pre-installed with some wire loom to not only help keep it protected, but to also give it a cleaner, more factory look. It's also going to have this dust cap, which is not only going to protect our terminals from any dirt or debris, but it's also going to allow us to store it around our safety chain loops just like this.To begin our install I went ahead and removed our spare tire. Now you don't have to, but it does give us a lot more room to work with. Now up here at our 7-way connector there's going to be a little gray clip. more
3/27/2019 2:52:15 PM
Demco 5th Wheel/Gooseneck Wiring Harness Installation - 2012 Chevrolet Silverado- Video
Today on our 2012 Chevrolet Silverado 3500HD, we're going to be taking a look at and installing the Demco 5th Wheel Gooseneck 90-Degree Wiring Harness with seven pole plug, part number DM8555002. This is what this wiring kit is going to look like once it's installed on a vehicle. What's nice about this one, is that is has 10 feet of wire which makes it easier to choose your location and put it wherever you want. Whereas some of the other 5th wheel wiring kits, they don't come with that much wire. Got seven way connector here, and it's got the spring loaded lid in order to make sure that it stays covered when not in use. That's going to help keep water and moisture out there so that it doesn't corrode your connectors. This wiring kit is going to do a great job of providing seven way power here in the bed of the truck. That way when hauling a gooseneck or 5th wheel trailer, you're not going to have to drape the wiring coming off the trailer over the tailgate down to the factory seven way, but you can just plug it in here instead. Now, let's show you how to install it. more
10/14/2016 1:56:48 PM
Fifth Wheel and Gooseneck Wiring Harness Installation - 2012 Chevrolet Silverado- Video
All right, today on this 2012 Chevrolet Silverado, we're going to install part number 20110. First thing we do is find a location for our wire harness 7-pole plug. We're going to inside the bed towards the back of the tailgate. We're going to drill out a pilot hole first, and then drill a 2" hole with a hole saw. We'll run our wire harness through the hole and out the bottom. Now we'll go ahead and take the plug and attach it to the wire harness. more
8/9/2013 12:28:07 PM
Pollak Twist-In Trailer Connector Installation - 2012 Chevrolet Silverado- Video
Today, on our 2012 Chevy Silverado well install the Pollak Twist-In 7 pole connector, part number pk11916. First, before we can install the connector well need to remove the manufactures wiring from the back of the blank connector. To remove the wiring well first need to pull back on the locking tab lock. Then, press on the locking tab and remove the wiring connector from the blank connector. Now, with the wiring removed go to t he outside of the bumper, press on the blank connector lock and then twist it and pull it out of its position. Next, well take the new Pollak 7 pole connector and install it into the bumper in reverse order of removing our blank connector. more
12/17/2012 10:16:49 AM
Trailer Wiring Harness Installation - 2012 Chevrolet Silverado- Video
Alright, today on a 2012 Chevrolet Silverado 3500, were going to install part number 50-97-410. First thing to do is find a location in the bed to drill out for a triple connector. Were going to drill out in this location right here (drilling). Alright now, well take a wire, run it through the hole and out through the bottom of the truck (drilling). Next well disconnect the natural connector 4-7 pole that's inside the bumper. There's a little locking tab, that removes, the gray one that's kind of hidden so you're going to take some time taking it apart. more
5/17/2012 4:36:14 PM
