Thule Apex 4 Swing Hitch Bike Rack Review - 2010 Chrysler Town and Country- Video

Today on our 2010 Chrysler Town and Country, we'll be test fitting the Thule Apex Swing 4-bike carrier for 2" hitches, part number TH9027. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch, line up the pin hole, and allow our attached pin to fall into place. Then we'll move to the rear of the shank and use the hand knob to secure our bike rack to our vehicle and engage our anti-rattle device. Next, we'll go over some clearance measurements. We have about 10-1/2" of ground clearance. The closest point of the carrier to the rear of our vehicle is about 1/4". more

Watch Video

7/19/2013 2:29:38 PM

Swagman Titan Hitch Bike Rack Review - 2010 Chrysler Town and Country- Video

Today on our 2010 Chrysler Town and Country, we'll be test fitting the Swagman Titan 4-bike rack for 1-1/4" and 2" hitches, part number S63410. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch, line up the pin hole, and thread in our anti-rattle bolt, tightening it with a wrench. Now we'll go over some clearance measurements. We have about 13-1/2" of ground clearance. The closest point of the carrier to the rear of our Town and Country is about 1". And we've added about 19" to the overall length of our vehicle. more

Watch Video

7/19/2013 2:27:51 PM

Softride Dura Hitch Bike Rack Review - 2010 Chrysler Town and Country- Video

Today on our 2010 Chrysler Town and Country, we'll be test fitting the Softride Dura Parallelogram tilting 4-bike rack for 1-1/4" and 2" hitches, part number SR26247. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch, line up the pin hole, and thread in our anti-rattle bolt, tightening it with a wrench. We can go ahead and install the lock as well. Now we'll go over some key measurements. We have about 10-1/2" of ground clearance. We've added about 32" to the overall length of our Town and Country. more

Watch Video

7/19/2013 2:23:53 PM

Kuat Sherpa Hitch Bike Rack Review - 2010 Chrysler Town and Country- Video

Today on our 2010 Chrysler Town and Country, we'll be test fitting the Kuat Sherpa aluminum, platform-style, hitch-mounted 2-bike rack, part number S102. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of the hitch, line up the pin hole, and install our pin and lock. We'll move to the rear of the shank and tighten the hand knob, securing our bike rack to our vehicle, and engaging our anti-rattle device. Now we'll go some key measurements. We have about 14" of ground clearance. The closest point of the carrier to the rear of our Town and Country is about 1". more

Watch Video

7/19/2013 2:19:50 PM

Thule Vertex 4 Hitch Bike Rack Review - 2013 Chrysler Town and Country- Video

Today on our 2013 Chrysler Town and Country, well be test fitting the Thule Vertex 4 Bike Carrier, part number TH9029. Now to begin our test fit, well slide the shank of the carrier into the opening of the hitch, align up our pinholes, thread our anti-rattle bolt through the pinhole and tighten with a wrench. Now well go ahead and go over a few clearance measurements to see how the bike carrier and this vehicle will fit together. There is about ten inches of ground clearance. The closest part of the vehicle to the closest part of the carrier is about two inches. With the cradle arms folded down, weve added about 11 inches to the overall length of the vehicle. more

Watch Video

2/20/2013 9:07:46 AM

Thule Doubletrack Hitch Bike Rack Review - 2013 Chrysler Town and County- Video

Today on our 2013 Chrysler Town and Country, well be test fitting the Thule Doubletrack Platform-Style 2 Bike Carrier, part number TH990XT. To being our test fit, well slide the shank of the carrier into the opening of the hitch, align up our pinholes, thread our anti-rattle bolt through the pinholes and tighten with a wrench. With the platform folded down, we can now have access to our cargo area. To load the bike, well unfold the mast by sliding the grey lever over to the right hand side, put the frame hooks to the top of the mast and well undo the cradle straps. Well set the bike into the wheel cradles, adjust the frame hook tightly against the frame and secure it with the straps. The completes todays test fit for the Thule Doubletrack Platform-Style 2 Bike Carrier, part number TH990XT on our 2013 Chrysler Town and Country. more

Watch Video

2/20/2013 9:07:43 AM

Yakima DoubleDown Ace Hitch Bike Rack Review - 2013 Chrysler Town and Country- Video

Today on our 2013 Chrysler Town and Country, well be test fitting the Yakima DoubleDown Ace 4 Bike Carrier, part number Y02451. Now to being our test fit, well slide the shank of the carrier into the opening of the hitch, align up our pinholes, insert our pin through our pinhole and tighten down the black knob to engage our anti-rattle device. Well now go ahead and go over a few clearance measurements to see how the bike carrier and this vehicle will fit together. Theres about 10 inches of ground clearance. The closet part of the vehicle to the closet part of the carrier is about 4 inches. With the cradle arms folded down, weve added about 11 inches to the overall length of the vehicle. more

Watch Video

2/15/2013 11:55:26 AM

Thule Hitching Post Pro Hitch Bike Rack Review - 2013 Chrysler Town and Country- Video

Today here at etrailer.com, on our 2013 Chrysler Town and Country, we'll be test fitting the etrailer exclusive, Thule Hitching Post Pro, Part Number TH934XTR. Now to begin our test fit, we'll slide the shank of the carrier into the opening of the hitch. Now, line up our pinholes, thread our anti-rattle bolt through the pinholes and tighten with the wrench. Now, we'll now go ahead and go over a few clearance measurements to see how the bike carrier and this vehicle will fit together. There is about 10 inches of ground clearance. Closest part of the vehicle to the closest part of the carrier is about 5-1/2 inches. more

Watch Video

2/15/2013 11:55:10 AM

Swagman Titan Hitch Bike Rack Review - 2013 Chrysler Town and Country- Video

Today on our 2013 Chrysler Town and Country, well be test fitting the Swagman Titan 4 Bike Carrier, part number S63410. To begin our test fit, well slide the shank of the carrier into the opening of the hitch, align up our pinholes, thread our anti-rattle bolt through the pinholes and tighten with a wrench. Now well go ahead and go over some clearance measurements to see how the bike carrier and this vehicle will fit together. There is about 11 inches of ground clearance. The closest part of the vehicle to the closest part of the carrier is about 7 inches. With the cradle arms folded down, weve added about 19 inches to the overall length of the vehicle. Well then pull the lever at the top of the mast to swing the cradle arms out and well get a measurement of 36 inches added to the overall length of the vehicle. more

Watch Video

2/15/2013 11:55:06 AM

SportRack EZ Hitch Bike Rack Review - 2013 Chrysler Town and Country- Video

Today on our 2013 Chrysler Town and Country, we'll be test fitting the SportRack 2-Bike Hitch Mounted Bike Rack for both 1-3/4 inches and 2 inch Hitches, Part Number A30901. Now to begin our test fit, using the included adapter for the 2 inch hitch, we'll slide up the shank into the hitch, line up the hitch pinhole, and install and tighten down the anti-rattle bolt. With the anti-rattle bolt tight, our bike rack is secured to the vehicle. At this point, we'll go ahead and give you a few measurements. Our ground clearance here at the back of the bike rack is 13-3/4 inches and from the closest point of the bike rack, here at the wheel cradle to the back of the vehicle is 7 inches. We'll now go ahead and unfold the bike rack platform, then open the cargo door. more

Watch Video

2/15/2013 11:55:01 AM

SportRack Escape 3 Hitch Bike Rack Review - 2013 Chrysler Town and Country- Video

Today on our 2013 Chrysler Town and Country, we'll be test fitting the SportRack Escape 3-Bike Hitch Mounted Bike Carrier for 1-3/4 inches and 2 inch Hitches, Part Number A30403. Now, with the included adapter for the 2 inch hitch already installed on our bike rack shank, we'll slide up the shank into the hitch, line up the hitch pinhole, and install and tighten down the anti-rattle bolt. With the bolt tight, our bike rack is secured to the vehicle. We'll now go ahead and give you a few measurements. Our ground clearance here at the back of the bike rack measures 10-3/4 inches and from the closest point of the bike rack, here at the mast, to the back of the vehicle here at the mast, measures 6 inches. We'll now pull the the pin here at the bottom of the mast and tilt the mast out of the way, where we can then open our cargo door. more

Watch Video

2/15/2013 11:54:58 AM

Softride Dura Hitch Bike Rack Review - 2013 Chrysler Town and Country- Video

Today on this a 2013 Chrysler Town and Country, we'll be test fitting the Softride Dura Parallelogram Tilting 4-Bike Carrier, Part Number SR25647. Now to begin our test fit, we'll slide the shank of our carrier into the opening of the hitch, line up our pinholes, thread our anti-rattle bolt through the pinholes and tighten with a wrench. Now, we'll go ahead and go over a few clearance measurements to see how the bike carrier and this vehicle will fit together. There was about 10 inches of ground clearance. Closest part of the vehicle to the closest part of the carrier is about 2 inches. We've added about 35 inches to the overall length of the vehicle. more

Watch Video

2/15/2013 11:54:55 AM

Kuat Sherpa Hitch Bike Rack Review - 2013 Chrysler Town and Country- Video

Today on our 2013 Chrysler Town and Country we'll be test fitting the Kuat Sherpa folding, tilting platform style two bike carrier, part number S102. Now to begin our test fit using the included adapter for the two inch hitch we'll slide the bike rack shank into the hitch, line up the hitch pin holes, and slide int eh hitch pin. We can then move to the back of the shank where we'll tighten the knob down securing our bike rack to the vehicle. At this point we'll give you a few measurements. Our ground clearance at the bike rack measures 11 1/2 inches. From the closest point of the bike rack with the platform in the stored position to the back of the vehicle is one inch. more

Watch Video

2/15/2013 10:42:03 AM

Hollywood Racks Traveler 5 Hitch Bike Rack Review - 2013 Chrysler Town and Country- Video

Today on our 2013 Chrysler Town and Country, well be test fitting the Hollywood Racks Traveler 5 Bike Carrier, part number HR9200. Now to being our test fit, well slide the shank of the carrier into the opening of the hitch, align up our pinholes, thread our anti-rattle bolt through the pinholes and tighten with a wrench. Now well go ahead and go over a few clearance measurements to see how the bike carrier and this vehicle will fit together. There is about 10 inches of ground clearance. The closest part of the vehicle to the closet part of the carrier is about 11 inches. With the cradle arms folded down, weve added about 14 inches to the overall length of the vehicle. Well then turn the black knobs at the left and right side of the carrier to swing the cradle arms out and well get a measurement of 39 inches added to the overall length of the vehicle with the cradle arms are folded out. more

Watch Video

2/15/2013 10:41:59 AM

Hollywood Racks Traveler Hitch Bike Rack Review - 2013 Chrysler Town and Country- Video

Today on our 2013 Chrysler Town and Country, we'll be test fitting the Hollywood Rack Traveller, 4-Bike Carrier, Part Number HR8500. Now to begin our test fit, we'll slide the shank of the carrierinto the opening of the hitch, we'll line up the pinhole, thread our anti-rattle bolt through the pinholes and tighten with the wrench. Now, we'll now go ahead and go over a few clearance measurements to see howthe bike carrier and this vehicle will fit together. There is about 11inches of ground clearance. Closest part of the vehicle to the closest partof the carrier is about 5 inches. With the cradle arms folded down,we've added about 7 inches to the overall length of the vehicle. more

Watch Video

2/15/2013 10:41:56 AM

Hollywood Racks Sport Rider Recumbent Bike Rack Review - 2013 Chrysler Town and Country- Video

Today on our 2013 Chrysler Town and Country, well be test fitting the Hollywood Rack Sport Rider two bike carrier for recumbence, part number hr1000r-1G. Now to begin our test fit, well slide the shank of the carrier into the opening of the hitch, line up our pin holes, thread our anti-rattle bolt through the pin holes and tighten them with a wrench. Now well go ahead and go over some clearance measurements to see how the bike carrier and this vehicle will fit together. There is about 11 of ground clearance, the closet part of the vehicle to the closet part of the carrier is about five inches. We have added about 27 to the overall length of the vehicle. To access our cargo area well pull the three pins at the bottom of the carrier to unfold the platform and the mast, this will allow us to have access to our cargo door. more

Watch Video

2/14/2013 4:41:37 PM

Thule Hitching Post Pro Hitch Bike Rack Review - 2009 Chrysler Town and Country- Video

Today on our 2009 Chrysler Town and Country, well be test fitting the Thule Hitching Post, part number TH934XTR. And to being our test fit, well simply slide our bike rack shank into the hitch and lineup the hitch pin hole and install and tighten down our anti-rattle bolt. With our anti-rattle bolt tight, our bike rack is secured to the vehicle. Now well go ahead and give you a few measurements. Our ground clearance at the bike rake is 11 and a quarter inches and from the closest point of the bike rake to the back of the vehicle is four and a half inches. Well now go ahead and pull the pin at the bottom of the bike rack mast to allow the mast to tilt down. more

Watch Video

12/19/2012 9:33:32 AM

Thule Vertex 4 Hitch Bike Rack Review - 2010 Chrysler Town and Country- Video

Today on our 2010 Chrysler Town and Country, were going to test fitting the Thule Vertex 4-Bike Carrier, part number th9029. We begin our test fit with a 2-inch adapter already installed on the bike rack shank, go ahead and slide the shank into the hitch, line up the hitch pin hole and install and tighten down our anti-rattle bolt. With the bolt tight, our bike rack is secured to the vehicle. Well now go ahead and give you some measurements. Our ground clearance at the bike rack is 11 inches, and from the closest point of the bike rack to the back of the vehicle is 1 inch. We can now pull the hitch switch at the bottom of the mast which will allow us to bring the mast down. more

Watch Video

11/26/2012 1:08:13 PM

Thule Hitching Post Pro Hitch Bike Rack Review - 2010 Chrysler Town and Country- Video

Today on our 2010 Chrysler Town and County, well be test fitting the Thule Hitching Post Pro Pulling and Tilting 4-Bike Rack with Anti-Sway Cradle, part number th934xtr. Now, to begin our test fit, using the included adaptor, well slide the bike rack shank into the hitch, line up the hitch pin hole, and install and tighten down our anti-rattle bolt. With the bolt tight, our bike rack is secured to the vehicle. Well now go ahead and give you a few measurements. Our ground clearance here at the bike rack is 10 inches, and from the closest point of the bike rack to the back of the vehicle, theres 4 inches. Well now go ahead and pull the pin here at the base of the bike rack mast, which will allow us to tilt the mast down. more

Watch Video

11/26/2012 1:08:10 PM

Swagman Titan Hitch Bike Rack Review - 2012 Chrysler Town and Country- Video

Today on our 2012 Chrysler Town and Country well be test fitting the Swagman Titan 4 Hitch Mounted Bike Carrier part number S63410. Now to mount our bike carrier to our van, well insert the shank of the carrier into the receiver tube of our hitch. Well line up the holes, thread in our anti-rattle bolt and tighten it down with a wrench. Now well go over a handful of clearance measurements so you can get an idea of how the rack is going to fit behind the vehicle. Weve got about 10 inches of ground clearance and 5 inches of clearance between the closest part of the carrier and the closest part of the vehicle. Overall weve added about 18 inches of length to the rear of our Town and Country. more

Watch Video

9/21/2012 2:01:51 PM

Thule Apex 4 Hitch Bike Rack Review - 2007 Chrysler Pacifica- Video

Today on our 2008 Chrysler Pacifica well be test fitting the Thule Apex four-bike carrier part number TH9025. Now to begin our test fit well slide our bike rack shank into the hitch and well make sure that our integrated locking hitch pin is pulled out. As the pin clears the hitch collar and allow it to fall into the hitch pinhole itself. With that done we can then move to the anti-rattle knob where we will tighten it down securing our bike rack to the vehicle. Now well go ahead and give you a few measurements. Our ground clearance at the bike rack is ten inches and from the closest point of bike rack, which is the anti-rattle knob to the back of the vehicle, is three inches. more

Watch Video

8/9/2012 8:01:19 AM

Thule Doubletrack Hitch Bike Rack Review - 2012 Chrysler 200- Video

All right today on this 2012 Chrysler 200, we're going to do a test fit of part number TH990XT from Thule, this is a Double Track Platform Bicycle Rack. Okay, a few points to know about this bicycle rack that it will work inch and a quarter receiver hitches both class one and class two. This will also work with two-inch receiver hitches with the included spacer. On this vehicle, we'll be working with a class one receiver hitch. We'll start off our test fit by installing the bike rack into the hitch, then we'll tighten down the anti-rattle bolt and then install the lock on the other side. Okay, with the bike rack installed, let's go ahead and get some clearance measurements. more

Watch Video

5/9/2012 6:50:12 PM

Thule Apex 4 Hitch Bike Rack Review - 2012 Chrysler 200- Video

Today on our 2012 Chrysler 200, we'll test fitting the Thule Apex Four-Bike Carrier, part number TH9025. Now our vehicle's equipped with an inch and a quarter hitch, so we remove the adaptor sleeve from our bike rack shank. Please note that when using in a class one hitch, you are limited to two bikes with this bike rack. Now to begin our test fit, we'll simply slide the bike rack shank into the hitch, line up the hitch pin hole and using the integrated locking hitch pin, we'll allow to slide into place. With it in place, we'll simply tighten down the anti-rattle knob here on the side of the shank. With that, our bike rack's secured to the vehicle and we're ready to load it up. more

Watch Video

5/9/2012 6:25:38 PM

Kuat Alpha Hitch Bike Rack Review - 2012 Chrysler 200- Video

Today on our 2012 Chrysler 200 well be test fitting the Kuat alpha folding locking 3 bike aluminum bike rack for inch and a quarter hitches. To begin our test fit well simply slide our bike rack shank into the hitch, line up the hitch pinhole and install out hitch pin. We can then move to the back of the bike rack and tighten down the anti-rattle knob. This will secure your bike rack to your vehicle. Now well go ahead and give you a few measurements. Our ground clearance at the bike rack is 10 inches and from the closest point of the bike rack mast to the bumper is 6 inches. more

Watch Video

5/9/2012 5:07:32 PM

Swagman Titan Hitch Bike Rack Review - 2012 Chrysler 200- Video

Today on this 2012 Chrysler 200 were going to do a test fit of part #: S63410 from Swagman, the Titan 4 bicycle rack. Some things you need to know about this bicycle rack that that it will work with inch and a quarter receiver hitches both class 1 and class 2, however when you use this bicycle rack on a class 1 receiver hitch youre limited to carrying just 2 bicycles. Now this will also work with 2 inch receiver hitches with the included spacer and on this vehicle today well be working with a class 1 receiver hitch. Now well start off our test fit by installing the bike rack into the hitch, then well go ahead and tighten down the anti-rattle bolt and put the safety clip on the other side. Alright, with the bike rack installed well go ahead and get some clearance measurements. From the bike rack to the bumper at its closest point is 7 inches. more

Watch Video

5/9/2012 4:49:37 PM

SportRack EZ Hitch Bike Rack Review - 2012 Chrysler 200- Video

Today on our 2012 Chrysler 200 well be test fitting the Sport Rack 2 bike hitch mounted bike rack part #: A30901. Now to begin our test fit well simply slide the bike rack shank into the hitch, line up the hitch pinhole and install our anti-rattle bolt. With our bolt tight our bike rack is secured to the vehicle. Now we can go ahead and give you a few measurements. Our ground clearance at the bike rack is 14 and a half inches and from the closest point of the bike rack to the back of the vehicle is 7 inches. Well now go ahead and pull the platform down on our bike rack and open our trunk. more

Watch Video

5/9/2012 4:39:47 PM

Rhode Gear Highway Hitch Bike Rack Review - 2012 Chrysler 200- Video

Alright, today on this 2012 Chrysler 200 were going to do a test fit of part #: RG8015220 from Road Gear, this is their Highway 2 bicycle rack. A few things to know about this bicycle rack that does work with inch and a quarter receiver hitches both class 1 and class 2 and this will also work with 2 inch receiver hitches with the included spacer and on this application well be working with class 1 receiver hitch. Now well start off by installing the bike rack into the hitch and then well go ahead and tighten down the anti-rattle bolt and then install the safety clip on the other side. Alright, at this point we can go ahead and get some clearance measurements. From the bike rack to the bumper at its closest point were looking at a distance of 6 inches. Ground clearance is going to be 8 and a half inches. more

Watch Video

5/9/2012 4:34:46 PM

Thule Vertex 4 Hitch Bike Rack Review - 2012 Chrysler 200- Video

Today on our 2012 Chrysler 200 we'll be test fitting the Thule Vertex 4 Bike Carrier, part number TH9029. Now to begin our test fit we'll simply place the bike rack shank into the hitch, line up the hitch pin hole and install our anti-rattle bolt. With our bolt tight, our bike rack is secured to the vehicle. Now we'll give you a few measurements. From the bottom or the bike rack to the ground is 10-1/2 inches and from the closest point of the bike rack to the back of the vehicle is 2-1/2 inches. Now we'll go ahead and pull the hitch switch at the bottom of the bike rack mast to tilt the mast down. more

Watch Video

4/30/2012 10:54:47 AM

Thule Doubletrack Hitch Bike Rack Review - 2011 Chrysler 200- Video

Today on our 2011 Chrysler 200 we'll be test fitting the Thule double track platform style bike carrier part no. TH990XT. Now this bike rack will fit either inch and 1/4 or 2 inch hitch. Our vehicle is equipped with the inch and 1/4 hitch and our bike rack is already preassembled so we're ready to go ahead and fit it to the vehicle. We'll slip the bike rack shank into the hitch, line up the hitch pin hole and insert our anti-retal bolt. We can then go ahead and tighten it down. more

Watch Video

2/14/2012 4:07:34 PM

SportRack EZ Hitch Bike Rack Review - 2011 Chrysler 200- Video

Today on our 2011 Chrysler 200, we'll be test fitting the SportRack 2 Bike Hitch Mounted Bike Rack with Wheel Mount Cradles part number A30901. A quick note about this bike rack, it will fit 1-1/4-inch hitches or 2-inch hitches with the provided adaptor. Our vehicle is equipped with the 1-1/4-inch hitch and our bike rack is preassembled so we're ready to go ahead and fit it to the vehicle. We'll need only to slide the bike rack shank into the hitch. We'll line up the hitch pin hole and insert our anti-rattle bolt. We'll then tighten it down using a wrench. more

Watch Video

2/14/2012 4:05:57 PM

Thule Vertex 4 Hitch Bike Rack Review - 2011 Chrysler 200- Video

Today on this 2011 Chrysler 200, were going to do a test fit for part number TH9029 from Thule, Vertex 4 Bike Carrier. Some things to know about this bicycle rack, that it will work with 1-1/4-inch receiver hitches both class 1 and class 2. However, when you use it for a class 1 receiver hitch as shown here, you can only carry two bicycles. And this will also work with 2-inch receiver hitches with the provided spacer. Well go ahead and start our test fit by installing the bike rack into the hitch then well tighten it down with the anti-rattle bolt. Ok, now at this point, we can go ahead and give you some clearance measurements. more

Watch Video

2/10/2012 2:29:02 PM

Thule Apex 4 Hitch Bike Rack Review - 2011 Chrysler 200- Video

Today on 2011 Chrysler 200 we're going to do a test fit of part number TH9025 from Thule the Apex 4 bicycle rack. Some things to know about this bicycle rack that it will work with 1-1/4" hitches both class I and class II. You also want to remember when you use the class receiver hitch, you own them with two bikes because it also works with 2-inch receiver hitches with the included spacer. We'll start off our test fit by installing the bike rack into the hitch, we'll snap the integrated hitch pin then we'll go ahead and tighten it down the anti-rattle device. With the bicycle rack installed, let's go ahead and get some clearance measurements. From the anti-rattle knob to the bumper, look at distance of 3". more

Watch Video

2/10/2012 2:25:15 PM

Softride Dura Hitch Bike Rack Review - 2012 Chrysler Town and Country- Video

Today on our 2012 Chrysler Town & Country we'll be test fitting the SoftRide Dura Parallelogram Tilting 4-Bike Bike Rack, product number SR26247. With our vehicle already equipped with a 2-inch hitch and our bike rack already preassembled, we're ready to go ahead and test fit it. We'll begin by inserting the bike rack into the hitch, lining up the hitch pin and inserting our anti-rattle bolt. With the anti-rattle bolt tight we'll now attach the security lock. With our security lock in place this will secure the bike rack to the vehicle. We'll now give you a couple of measurements. more

Watch Video

1/17/2012 2:19:51 PM

Thule Doubletrack Hitch Bike Rack Review - 2010 Chrysler Town and Country- Video

Today on 2010 Chrysler Town & Country, we're going to do a test fit of the Thule Bicycle Rack, product number TH990XT, the Thule Doubletrack Platform Carrier. One quick note about this carrier, that will work with 1-1/4 inch receiver hitches, class 1 and class 2. It will work. It will work on 2-inch receiver hitches as well like the one we're using on this vehicle. And the bike rack does come with a proper spacer work on this hitch. First one, install the bike rack into the hitch, we'll tighten down the anti-rattle bolt and put the lock in on the other side. more

Watch Video

1/5/2012 1:05:08 PM

Thule Vertex 4 Hitch Bike Rack Review - 2012 Chrysler Town and Country- Video

Today on our 2012 Chrysler Town & Country we will be test fitting the Thule Vertex 4 Bike Rack, part number TH9029. With our vehicle already equipped with a two inch hitch and our bike rack already pre-assembled, we're ready to go ahead and fit the rack. We'll begin by sliding the shank into the hitch, line up the pin, and then install the anti-rattle bolt. With our anti-rattle bolt snug we'll go ahead and tighten it down using our three quarter inch wrench. Now that our bike rack is tight we're going to go ahead and give you a couple of measurements. From the bottom of the bike rack to the floor is ten and a half inches. more

Watch Video

1/5/2012 8:47:14 AM

SportRack EZ Hitch Bike Rack Review - 2010 Chrysler Town and Country- Video

Today on this 2010 Chrysler Town and Country were going to do a test fit of part number a30901 from SportRack. This is SportRacks 2 Bike Easy Hitch Mounted Rack. One quick note, this bike will work with 1-3/4 receiver hitches class one and class two, and will also work on 2 receiver hitches with the included spacer, and we will be using that today. Okay the first thing we will do is go ahead and install the bicycle rack into the hitch and then we will tighten down the anti rattle bolt and put the safety pin on the other side, and we use a 3/4 wrench to tighten it down. Okay from the closest point of the bicycle rack to the rear hatch on the van is going to be 9-1/2, and ground clearance will be 10-1/2, now we will go ahead and fold the rack and give you one more measurement at the very end of it. We will pull out two key pins, unfold it and then reinstall the pins in matching holes. more

Watch Video

11/21/2011 4:11:38 PM

Rhode Gear Highway Hitch Bike Rack Review - 2010 Chrysler Town and Country- Video

Today on this 2010 Chrysler Town and Country were going to do a test fit of part number rg8015220 from RhodeGear, this is their highway 2 bike carrier. Quick note about this bike carrier it will fit 1-1/4 receiver hitches both class 1 and class 2, and will also work with a 2 receiver hitch with included spacer, and thats what well be using today. We will go ahead and install the bike rack into the receiver hitch, tighten down the anti-rattle bolt and safety pin on the other side. And we use a wrench to tighten it down. Okay now we will give you some measurements to give you an idea of clearance between the bicycle rack and the van, and the ground. At the closest point to the bumper were looking at 4-1/2, and ground clearance will be 9-1/2. more

Watch Video

11/18/2011 2:01:09 AM

  5