Trailer Hitch Installation - 2012 Cadillac SRX - Curt- Video
Today on our 2012 Cadillac SRX, we're going to be taking a look at and installing the Curt Class 3 Trailer Hitch Receiver, part number C13002. Here's what this hitch is going to look like once it's installed on the vehicle. As you can see, it's pretty close to flush with the rear bumper here, so that maintains a nice clean look, but it doesn't stick out too far to where you may knock your knee on it. It's got the 2 inch by 2 inch receiver tube opening. It's got the nice looking reinforcement collar that helps it look nice and durable. Here we've got these loop style safety chain connection points which is going to give us plenty of room in order to get whatever type of safety chains we may have connected. Overall, this hitch is pretty well hidden as the cross tube, you can just kind of see it right here, but because it's tucked up behind the bumper like that, it maintains a really clean look to where it doesn't look like it's out of place. more
9/2/2016 9:36:41 AM
Trailer Hitch Installation - 2012 Cadillac SRX - Curt C12070- Video
Today on our 2012 Cadillac SRX, we're going to be taking a look at and installing the Curt Class II Trailer Hitch Receiver, part no. C12070. Here's what this hitch is going to look like once it's installed on the vehicle. As you can see, most of it's pretty well hidden. The square cross tube right here are pretty flush up underneath to where it doesn't really stand out or make it seem too noticeable. It helps to maintain a nice, clean look on your vehicle. more
9/2/2016 9:36:16 AM
Best 2012 Cadillac SRX Hitch Options- Video
Today we're going to be taking a look at the best hitch options for your 2012 Cadillac SRX. We're going to start with our top hitch here. This is going to be the CURT class three, part number C13002. Then our second hitch is going to be the CURT class two hitch, part number C12070, followed by the last one here. Going to be our Draw-Tite class three, part number 75682. Now our first major difference in our hitch is going to be this CURT here. This is going to be a class two hitch, where the other ones are going to be class threes. more
6/29/2016 12:29:28 PM
Trailer Hitch Installation - 2012 Cadillac SRX - Draw-Tite- Video
Today on our 2012 Cadillac SRX we're going to install the Draw-Tite Hitch, part number 75682. This is what our hitch will look like once it's installed. We'll go ahead and give you a couple of measurements to assist you with selecting accessories. From the center of the hitch pin hole to outer most edge of the bumper is 3 inches, from the top of the receiver tube to the ground is 19 inches. This will assist you with selecting accessories such as a draw bar, a bike rack, or a cargo carrier. Now let's go ahead with the installation. more
4/9/2012 1:56:30 PM
