bing tracking image

Chrysler Aspen Roof Rack Installation And Review Videos

     

Thule Crossroad Roof Rack Installation - 2008 Chrysler Aspen- Video

Thule Crossroad Roof Rack Installation - 2008 Chrysler Aspen

Today on this 2008 Chrysler Aspen with factory raised side rails we are going to install a Thule Crossroad roof rack system. We already have our crossbar assemblies put together and now we are ready to go ahead and mount them up on our side rails. There is a few things that you are going to want to make sure to do when positioning the roof rack. First you need to check to make sure that the overhang of the crossbars is even on both the driver side and the passenger side. The last thing we need to do is make sure that our new crossbar is running perpendicular with our factory raised side rails. To do that we are going to measure from the crossroad foot to the front mount of the side rail on both sides of the vehicle and make sure this measurement is even. Once we have our positioning set we are ready to tighten down the front bar assembly we will move back and forth from the passenger side to the driver side to make sure that we tighten down the system evenly. After we have the front crossbar tightened down we are ready to mount the rear. :54 more


Watch Video

9/14/2011 11:22:50 AM



Rhino Rack Roof Rack Installation - 2008 Chrysler Aspen- Video

Rhino Rack Roof Rack Installation - 2008 Chrysler Aspen

Today on this 2008 Chrysler Aspen we will be installing a Rhino Rack roof rack part number SXB4-SILV. We already have our crossbar assemblies put together so now we are ready to mount them up on our vehicle. We want to check the overhang of the crossbar on both the driver side and passenger side to make sure it is even. We need to ensure that the front crossbar is running perpendicular to our factory raised side rails. To do this we will measure from the end of the clamp to the front plastic shroud on our side rails and make sure this measurement is even on both sides. Once we have the front crossbar assembly in place we can go ahead and begin tightening it down. We will move back and forth from the passenger side to the drivers side so we tighten down the roof rack system evenly and we do not lose our position. more


Watch Video

9/13/2011 1:21:23 AM



  1