Best 2013 Hyundai Sonata Trailer Hitch Options- Video
Shane: Hi, I'm Shane with etrailer.com. Today we're going to be taking a look at the best trailer hitch options for your 2013 Hyundai Sonata. Here on top we have the CURT. Here on the bottom we have the Draw-Tite. Both these hitches can work with the hybrid model or the non-hybrid model. Both of them are going to be Class 1 hitches, so you want to make sure that you're only using Class 1 accessories. more
7/16/2019 9:22:19 AM
Draw-Tite Trailer Hitch Installation - 2013 Hyundai Sonata- Video
Speaker 1: Today on our 2013 Hyundai Sonata, you're going to be taking a look at, and I'm going to show you how to install the Draw-Tite Class 1 Sportsframe Trailer Hitch Receiver. Part number 24965.This is what our hitch looks like when it's installed, you can see the receiver tube is noticeable down at the bottom of the bumper fascia. However, it does sit up there nice and tight against the bottom of the bumper fascia and it fits nicely with the contour of the vehicle.This is going to be a Class 1 hitch, so it's only going to accept Class 1 accessories. It's going to be an 1-1/4" by 1-1/4" receiver tube, your hitch pin hole is going to be 1/2" in diameter. It's going to have rolled steel style safety chain loops, gives you plenty of room for different size safety chain hooks.Now, you're going to have a 200 pound max tow weight, which is downward pressure on the inside of the receiver tube. You're going to have a 2000 pound max trailer weight, which is the trailer plus the load included. more
8/29/2018 2:07:20 PM
Trailer Hitch Installation - 2013 Hyundai Sonata - Curt- Video
Today on our 2013 Hyundai Sonata, we'll be installing the Curt Hitch, part number C11025. This is what our hitch will look like once installed. Next, we'll go ahead and give you a couple measurements to assist you selecting accessories for your new hitch. From the center of the hitch pin hole to the outermost edge of the bumper is 4 1/4". From the top of the receiver tube opening to the ground is 10 3/4". This will assist you in selecting accessories such as a bike rack or cargo carrier. more
12/8/2014 9:32:32 AM
Trailer Hitch Installation - 2013 Hyundai Sonata - Draw-Tite- Video
Today on our 2013 Hyundai Sonata were going to install part number 24853 from Draw Tite. This is what the hitch looks like when its installed on the vehicle. Next well give you some measurements that will help you out in selecting some accessories such as a bicycle rack or a cargo carrier. From the top of the receiver tube down to the ground will be about 10 and three-quarter inches. From the center of the inaudible 0:00:21:3 hole to the edge of the bumper will be about three and a half inches. Now Ill go ahead and show you how the hitch is installed. more
10/15/2012 9:54:12 AM
