bing tracking image

Accessories and Parts Installation And Review Videos


Review of Derale Transmission Coolers - D13091- Video

Review of Derale Transmission Coolers - D13091

Hello, neighbors. Steve here with etrailer.com. Folks, we're looking at a Derale Remote Transmission Filter Kit with a nice temperature gauge. So folks, with this kit, you're gonna prolong the life of your transmission by extending the time between necessary fluid changes. It's also gonna filter the fluid and remove contaminants better than your OE screen type filters. And it's gonna increase your fluid capacity, thereby taking longer to heat up the fluid and everything as well. more


Watch Video

6/26/2024 9:16:30 AM



Review of Dexter Brake Actuator - Hydraulic Line Kit - 80910- Video

Review of Dexter Brake Actuator - Hydraulic Line Kit - 80910

Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at the hydraulic line kit for torsion axles. Now this is an additional line kit that is used on torsion axles along with the line kit number 9504 or the 9505. Both of those kits we do sell separately on our website. This kit here will complete one wheel, two of these hoses are needed per axle. If you notice, the hardware is included, the mounting bracket in the clip to hold the hose to the mounting bracket, overall length on this tip to tip is 18-3/4". more


Watch Video

6/26/2024 9:11:37 AM



Review of Pollak Starter Solenoid - PK5231201- Video

Review of Pollak Starter Solenoid - PK5231201

Hello, neighbors and friends. Steven here with etrailer.com. Folks, today we're looking at our starter solenoid. It's a single-pole, single-throw, 12 volt, 100 amp, continuous duty, grounded. It does include the hardware as you can see, all the nuts and everything here, and washers, lock washers needed for the install. There's the mounting bracket that's already been attached to it. more


Watch Video

6/25/2024 2:33:56 PM



Review of Bulldog Replacement Bubble Level Assembly - BD500193- Video

Review of Bulldog Replacement Bubble Level Assembly - BD500193

Hello, neighbors, Steve here with etrailer.com. Today we're looking at a replacement bubble level assembly with the included screws for your BULLDOG 4,000-pound powered-drive camper jacks. So folks, this does replace the bubble level for the top of your BULLDOG 4,000-pound level jacks. You got the pieces here to assemble it, (level snapping) a nice foam backing, and everything, and the installation screws that you see before you. Very simple install. I'll fill some dimensions up here with an image, inch and a half, center to center, no matter which direction you go on the screw line holes, and overall diameter, it is 2 1/8 inches wide on the whole assembly. more


Watch Video

6/25/2024 2:24:21 PM



Review of UWS Replacement Lock Cylinder and Keys 507 - UWSLOCKCH507- Video

Review of UWS Replacement Lock Cylinder and Keys 507 - UWSLOCKCH507

Hello, neighbors. Steve here with etrailer.com. Let's take a look at this replacement lock cylinder for your UWS toolboxes with the square paddle handles, specifically key and lock number CH507. So folks, this replaces a damaged lock cylinder on your UWS toolbox with the square paddle handles only. So, I wanna point that out. It will not, repeat, not work with the drawer slide, dog boxes, T handle or push button locks. more


Watch Video

6/25/2024 1:58:23 PM



Review of Optronics 1157 Bulb - A1157B- Video

Review of Optronics 1157 Bulb - A1157B

Hello neighbors, Steve here with etrailer.com. Folks, today we're looking at a replacement light bulb, specifically a number 1157 bulb, and this is gonna be a direct replacement bulb for your 1157 bulbs. It has 8.3 watts for the taillight function and 26.9 watts for your stop slash turn functions. So it is considered a stop tail and turn triple function, if you will. There are only two filaments in there. One of 'em doubles up obviously as the other light. more


Watch Video

6/25/2024 12:49:29 PM



Review of Bulldog Replacement Dorp Leg Pull Pin With Chain - BD500337- Video

Review of Bulldog Replacement Dorp Leg Pull Pin With Chain - BD500337

Hi everybody, Andy here with etrailer.com. Let's take a real quick look at this Bulldog replacement drop leg pull pin with chain. Now, this is going to replace the pull pin for your Bulldog square jack with drop leg and on your screen for your easy reference, I am including all of the model numbers of that square jack with drop leg that this is going to fit. And as you know, this is going to secure your drop leg at your desired trailer height. It includes exactly what you see here. Obviously, gonna get the pin, you're gonna get the chain, and then you're going to get the snap clip. more


Watch Video

6/25/2024 12:12:46 PM



Review of Diamond 2099W Incandescent Light Bulb - DI97VR- Video

Review of Diamond 2099W Incandescent Light Bulb - DI97VR

Hello neighbors, Steve here with etrailer.com. Today we're looking at our 2099 W incandescent light bulb with a single contact bayonet style 13 watts of soft white frosted light. That's right, folks, this incandescent bulb does replace a 2099 dash W or a G16 by one half light bulb to provide soft white lighting. It's gonna be perfect for those ceiling fans, bathroom vanities, accent lights, those kind of things. It's gonna be frosted like you see. It's gonna diffuse light for a gentle glow. more


Watch Video

6/25/2024 12:02:45 PM



Review of Superwinch Replacement Control Box UT3000 Winch - SW87-17428- Video

Review of Superwinch Replacement Control Box UT3000 Winch - SW87-17428

Hi everybody. Andy here with etrailer.com. Let's take a real quick look together at the Superwinch replacement control box. Now this is going to replace the control box on your Superwinch UT 3000 winch. And on your screen for your easy reference, I am including the model number of that winch that this is going to fit and work with. And as you know, this does provide the plug for a handheld remote. more


Watch Video

6/25/2024 11:53:46 AM



Review of Diamond JC10 Halogen Mini Light Bulb - DI24VR- Video

Review of Diamond JC10 Halogen Mini Light Bulb - DI24VR

Hello neighbors. Steven here with the etrailer.com. Folks, today we're looking at a JC 10 halogen mini light bulb with a two pin base rated for 10 watts of soft white light. So folks, I did want to throw an image up of what this looks like close up just so you can see a little better than what I can probably show you in person here, but we're gonna try, okay. So going in for a closeup overhead, we're looking here at quantity one, one bulb. The bulb size is three eight inch diameter, has a light output of 400 wall lumens. more


Watch Video

6/25/2024 11:52:52 AM



A Closer Look at the Lets Go Aero V-Tree Support Arms HomeBase Storage Dock- Video

A Closer Look at the Lets Go Aero V-Tree Support Arms HomeBase Storage Dock

How's it going neighbors This is Ed here with etrailer.com. And we're taking a look at the home base from Let's Go Aero that works with your VBar style bike carriers. So what you're gonna receive in the package is this gonna be the base on the wheels, and you're going to use your existing bars from your V-style Let's Go Aero bike carriers. So the TireBiter or the Full Nelson, you are gonna use the same parts that make the contact with your wheels, and just slide it right into the post. So this is gonna be a great way to get more storage space for your bike carrier as well as your bikes. So having a device like this is really handy because it allows you to get your bikes transferred in a way where it makes it a lot easier to store it in a smaller space like a garage. more


Watch Video

6/25/2024 11:47:59 AM



Breakdown of the Blue Ox Base Plate and Tow Bar Lock Kit- Video

Breakdown of the Blue Ox Base Plate and Tow Bar Lock Kit

Hey everyone, Ryan here at etrailer. Today we're gonna be checking out the Blue Ox tow bar lock set. And with these, you're gonna get a quantity of two and they're gonna be designed to lock or secure the connection point here where your tow bar hooks up to your base plate. With flat towing components being relatively expensive, a lot of the times, you know, it's not a bad idea to protect your investment. And so that's where something like this would come into play, and it's going to work with the Blue Ox style tow bars. So if your ends look like this, you know, you're gonna be able to replace the stock pins with the locks. more


Watch Video

6/25/2024 11:42:09 AM



Installation Guide for the Roadmaster Battery Charge Line Kit - 2023 Ford Escape- Video

Installation Guide for the Roadmaster Battery Charge Line Kit - 2023 Ford Escape

Hey, everyone, Ryan here at etrailer. Today on our 2023 Ford Escape, we're gonna be showing you how to install the Roadmaster Towed Vehicle Battery Charge Line Kit. Before we get into that though, let's just take a minute, we'll check this out, and talk about why it's a good idea to use something like this. Right off the bat, what a charge line kit is going to do is keep your Escape's battery topped off and maintained whenever you're flat-towing it down the road. And there's a handful of reasons why your battery could get depleted in the first place. One of 'em being because of your supplemental braking system, right So every time that system turns on, it's gonna use a little bit of battery power, which could potentially drain it down over time. more


Watch Video

6/25/2024 11:41:05 AM



Blue Ox Second Vehicle Breakaway Kit Review- Video

Blue Ox Second Vehicle Breakaway Kit Review

Hey everyone, Ryan here at etrailer. Today we're gonna be checking out the Blue Ox second vehicle breakaway switch kit. And with this kit, what you're gonna get is a few simple components here. So you'll get the breakaway switch, the tether that goes from the back of your motor home to the front of your towed vehicle, and the wiring that you need to hook up to the breakaway switch, and be able to plug into your Patriot braking system. So there's a few different reasons where a kit like this would come into play. Probably one of the most popular ones would be that you set up a second vehicle to be flat towed down the road, right And that's one of the nice things about these Patriot braking systems, being that they're portable, you can put 'em in different cars very easily, right So if you have that second car, you don't have to worry about buying a whole new braking system. more


Watch Video

6/25/2024 11:39:44 AM



A Closer Look at the Blue Ox Second Vehicle Breakaway Kit - 2023 Ford Escape- Video

A Closer Look at the Blue Ox Second Vehicle Breakaway Kit - 2023 Ford Escape

Hey, everyone. Ryan here at etrailer. Today on our 2023 Ford Escape, we're gonna be showing you how to install the Blue Ox Second Vehicle Breakaway Switch Kit. Before we do that though, let's take a minute. We'll check this out and you know, let's talk about some of the scenarios that this might be beneficial to you for. So right away what this kit is gonna come with is a few simple components. more


Watch Video

6/25/2024 11:38:51 AM



Review of Redline Galvanized Steel UShaped BoltOn Brackets Plastic Single Axle Fender - PF1135-BKT-2- Video

Review of Redline Galvanized Steel UShaped BoltOn Brackets Plastic Single Axle Fender - PF1135-BKT-2

Hi everybody. Andy here with etrailer.com. Let's take a brief look together at this Galvanized Steel U-shaped Bolt On Bracket for your plastic single axle fender. Now, right up front, I do wanna let you know that you can either get a single bracket like I have here on my table before me, or you can pick up a pair of these brackets. And on your screen I am including our item numbers, either for the single one, or for the pair. And whichever setup is going to work best for you, you can just take that item number, pop it in the search field of our website. more


Watch Video

6/25/2024 11:37:14 AM



Review of Redline Galvanized Steel U-Shaped Bolt-On Bracket Plastic Single Axle Fender - PF1135-BKT- Video

Review of Redline Galvanized Steel U-Shaped Bolt-On Bracket Plastic Single Axle Fender - PF1135-BKT

Hi everybody, Andy here with etrailer.com. Let's take a brief look together at this galvanized steel U-shaped bolt on bracket for your plastic single axle fender. Now, right up front, I do wanna let you know that you can either get a single bracket like I have here on my table before me, or you can pick up a pair of these brackets and on your screen I am including our item numbers, either for the single one or for the pair, and which one, whichever setup is going to work best for you. You can just take that item number, pop it in the search field of our website. That will take you to the one that you're looking for, either the single or the pair, and you can add that to your order. Now, this hot dipped galvanized steel bracket is specifically designed to make it easier to mount fender, the fender that you see there on your screen, identified by that item number. more


Watch Video

6/25/2024 11:35:33 AM



Review of Blue Ox Tow Bar Adapter Bracket - BX88178- Video

Review of Blue Ox Tow Bar Adapter Bracket - BX88178

Hello neighbors, Steve here with etrailer.com. Folks, today we're looking at our Blue Ox tow bar adapter bracket for the Roadmaster standard and crossbar style base plates. That's right folks, so with this adapter bracket, you can use your Blue Ox tow bar with your Roadmaster standard and crossbar style, the XL and EZ series base plates. So the result is gonna give you a 24 inch spacing in between the brackets. This is made here in the US, has a nice one year warranty. You get all the mounting hardware required and obviously the Blue Ox tow bar adapter bracket itself. more


Watch Video

6/25/2024 11:17:29 AM



Review of Yakima Replacement Long Hook B Assembly - 8880523- Video

Review of Yakima Replacement Long Hook B Assembly - 8880523

Hello neighbors and friends, Steven here with etrailer.com. Let's take a look together today at the replacement long hook or B assembly for the Yakima two timer and four timer bike racks. So folks, this will simply replace one quantity one of either lost or damaged long frame hook for your Yakima two timer or four timer hitch mounted bike racks. So again, this is what they consider the B assembly, the long hook. If you are looking for the correct part, right here in the plastic, I know it's hard to see, but they do have the letter B molded in the plastic again, right in this area. I do apologize, it's kinda hard to see, but that is how you would determine and also because of the height. more


Watch Video

6/25/2024 11:01:41 AM



Review of Yakima Replacement Short Hook A Assembly - 8880524- Video

Review of Yakima Replacement Short Hook A Assembly - 8880524

Hello, neighbors and friends. Steven here with etrailer.com. Folks, today we're looking at a replacement short hook, or the "A" assembly for the Yakima Two Timer or Four Timer bike racks. That's right, folks, so this replaces a lost or damaged short-frame hook for the Yakima Two Timer or the Yakima Four Timer hitch-mounted bike racks. It does pair with the long hook assembly, or the "B" assembly, on the mast, and the "B" assembly, or long hook, is sold separately. If you need the "B" hook, that item number is 8880523. more


Watch Video

6/25/2024 10:55:43 AM



Review of MORryde Replacement 30 Rubber Shear Spring - MR73UR- Video

Review of MORryde Replacement 30 Rubber Shear Spring - MR73UR

Hello, neighbors. Steve here with etrailer.com. Today, we're looking at a replacement number 30 rubber shear spring for your MORryde trailer and RV suspension systems. So folks, this does replace one, quantity one, of a number 30 rubber shear spring for those MORryde suspension systems. The number 30 is embossed into the rubber on the side of the spring. It's kind of hard to see here in the image, so I do apologize for that. more


Watch Video

6/25/2024 10:43:46 AM



Review of MORryde Replacement 35 Rubber Shear Spring - MR83UR- Video

Review of MORryde Replacement 35 Rubber Shear Spring - MR83UR

Hello neighbors, Steve here with the etrailer.com. Folks, today we're looking at the replacement number 35 rubber shear spring for your MORryde trailer and RV suspension systems. So folks, again, this will replace one quantity one, number 35 shear spring for your MORryde suspension system. So the number 35 is embossed here and molded into the rubber rather. So you probably can't see it on the image, but rest assured, the number 35 is inside the rubber there for your viewing and that's how you would pretty much match up to see, depending on which one you need, make sure you find that number embossed on the spring itself. So shear spring, nice heavy duty, just a direct replacement from MORryde. more


Watch Video

6/25/2024 10:37:17 AM



Review of MORryde Replacement 11 Rubber Shear Spring - MR63UR- Video

Review of MORryde Replacement 11 Rubber Shear Spring - MR63UR

Hello neighbors, Steve here with etrailer.com. Folks, today we're looking at a replacement number 11 rubber shear spring for those MORryde trailer and RV suspension systems. So folks, again, this replaces a number 11 rubber shear spring. It should look something like this for your MORryde suspension system. It does actually have the number 11 embossed in the rubber. It's kind of hard to see there because of the material and the the depth and everything. more


Watch Video

6/25/2024 10:30:18 AM



Review of BulletProof Hitches - Trailer Hitch Ball Mount - BPH53RR- Video

Review of BulletProof Hitches - Trailer Hitch Ball Mount - BPH53RR

Hello, everybody. This is Jeff at etrailer.com. Today, we can take a look at this flat plate attachment for BulletProof Hitches adjustable channel ball mounts. Now, this is a utility plate that's designed to install into the BulletProof Hitches adjustable ball mount channel. Right here, it is designed to install in the three-inch wide channel, does use a two-inch solid steel shank, and then a half-inch thick steel plate on top of that. It's rated for extreme weight. more


Watch Video

6/25/2024 10:25:40 AM



Review of Hydrastar Brake Actuator - Trailer Brake Line Kit - HS496-153- Video

Review of Hydrastar Brake Actuator - Trailer Brake Line Kit - HS496-153

Hello, everybody, this is Jeff at etrailer.com. Today we're gonna take a look at the Hydrastar triple axle 15' long hydraulic brake line kit. Now this Hydrastar hydraulic brake line kit will come with all the brake lines, all the fittings, and all the associated hardware that's needed to complete your hydraulic brake line job on a triple axle trailer. And what's nice on this kit is the main line right here. It is a 3/16" diameter main line, which is wider than the standard brake lines so your fluid can move faster for more consistent braking. The kit will include everything laid out here on the table. more


Watch Video

6/25/2024 10:21:40 AM



Review of Surco Products Adapters For Safari Rack 1991-2002 Isuzu Trooper - SPSTR100- Video

Review of Surco Products Adapters For Safari Rack 1991-2002 Isuzu Trooper - SPSTR100

Hi, everybody. Andy here with etrailer.com. Let's take a real quick look at these Surco adapters for your Safari Rack. Now, these specialty adapters for your Surco Safari Rack are going to fit your 1991 to 2002 Isuzu Trooper with a factory roof rack and these are specialty adapters to fit your Safari Rack to your '91 to '02 Trooper factory roof rack. And so these adapters are directly from Surco. So what that means for you is you can trust that this is going to fit with your Safari Rack. more


Watch Video

6/25/2024 9:00:25 AM



Review of MORryde MORryde Tailgate Reinforcement for Jeep Wrangler - MR78DR- Video

Review of MORryde MORryde Tailgate Reinforcement for Jeep Wrangler - MR78DR

Hello, neighbors and friends, Steve here with etrailer.com. Folks, today, we're looking at our MORryde Tailgate Reinforcement for the Jeep Wrangler JLs. Now, folks, this is a custom fit application, so please make sure you're checking out our fit guide here at etrailer.com. Top side of our homepage where it says my vehicle, enter things such as your make and model, make sure you're getting the right parts for your specific vehicle. Keep in mind, videos can become outdated, and newer years could possibly fit. So getting into it, folks, this nice support frame is gonna reinforce your tailgate to be able to handle extra weight for things such as a spare tire that's oversized. more


Watch Video

6/25/2024 8:29:43 AM



Review of Westin Replacement Hardware Kit Sportsman Grille Guard New Style - 40-211PK- Video

Review of Westin Replacement Hardware Kit Sportsman Grille Guard New Style - 40-211PK

Hi, everybody. Andy here with etrailer.com. Let's take a real quick look at this Westin Replacement Hardware Kit. Now this is going to replace the installation hardware kit needed for your Westin Sportsman Grille Guard, the new style, and on your screen I am including the model numbers of that Sportsman Grille Guard that this hardware is gonna work with. And this hardware is going to fit your 2007 to 2013 Chevrolet Avalanche, then your 2007 to 2014 Chevrolet Suburban 1500, and then Chevrolet Tahoe. Now this hardware kit is the direct replacement from Westin, so you can trust that this is going to fit right in place of that original hardware, whether some components of it got damaged or maybe some of it went missing, you're not gonna have to worry about compatibility issues, fitment issues, or anything like that. more


Watch Video

6/25/2024 8:25:52 AM



Review of Aries Automotive Replacement Installation Hardware Kit Grille Guard - AABRKT-4042- Video

Review of Aries Automotive Replacement Installation Hardware Kit Grille Guard - AABRKT-4042

Hi, everybody, Andy here with etrailer.com. Let's take a look together at this Aries Replacement Installation Hardware. Now, this hardware is going to replace the installation hardware kit needed for your Aries Automotive Grille Guard. And on your screen, I'm including the model numbers of that grille guard, and of course, that grille guard and this hardware is designed to fit your 1988 to 1998 GMC and Chevrolet C/K Series Pickups. Then your 1992 to 1999 Chevrolet Suburban, then your 1995 to 1999 Chevrolet Tahoe and GMC Yukon. Now, this hardware is going to be exactly like the hardware that you are needing to replace these brackets, and this hardware that you see there in that bag. more


Watch Video

6/25/2024 8:01:38 AM



Review of Bauer Products Replacement Key AE003 - BA29MR- Video

Review of Bauer Products Replacement Key AE003 - BA29MR

Hi, everybody. Andy here with etrailer.com. Let's take a real quick look at this Bower replacement key. Now this is going to replace one lost or damaged AE series key numbered AE003 as you can see there, stamped on the key, and this is gonna work for your Bower lock. And this key is going to be exactly like the one that you're needing to replace. This is the direct replacements, the replacement key from Bower products, so you can trust that this is going to fit right in place of that original key, whether as I mentioned before, it got damaged or maybe misplaced. more


Watch Video

6/24/2024 3:31:20 PM



Review of Bauer Products Replacement Key AE001 - BA79MR- Video

Review of Bauer Products Replacement Key AE001 - BA79MR

Hi, everybody. Andy here with etrailer.com. Let's take a real quick look together at this Bauer Replacement Key. This is going to replace one loss or damaged AE Series key numbered AE001, and you can see that stamped there right on the key. AE001. This is gonna be, of course, for your Bauer lock. more


Watch Video

6/24/2024 3:27:09 PM



Review of Wheel Masters Front Wheels Tire Pressure Valve Extender 90 Degree Bend - WM802990- Video

Review of Wheel Masters Front Wheels Tire Pressure Valve Extender 90 Degree Bend - WM802990

Hi everybody. Andy here with etrailer.com. Let's take a real quick look together at these Wheel Masters front wheels tire pressure valve extenders. These angled valve extenders are gonna make it very easy to access your valve stems on your front tires. That 90 degree bend is going to place the valve stem in an easy to reach spot and the threaded head on extender is going to screw onto your existing valve stem. And this is recommended for use on metal valve stems only. more


Watch Video

6/24/2024 3:16:39 PM



Review of etrailer Replacement Sidewind Handle etrailer Ram MJ-1000 Series Jack - MJ-1000B-HD- Video

Review of etrailer Replacement Sidewind Handle etrailer Ram MJ-1000 Series Jack - MJ-1000B-HD

Hi, everybody. Andy here with etrailer.com. Let's take a real quick look at this replacement sidewind handle. Now this is going to replace the sidewind handle from your etrailer or RAM swivel marine jack. And this is designed for use with MJ 1000 series jacks. And this handle does feature a zinc finished arm. more


Watch Video

6/24/2024 3:03:38 PM



Review of MORryde Trailer Suspension Parts - MR35UR- Video

Review of MORryde Trailer Suspension Parts - MR35UR

Hello neighbors, Steven here with etrailer.com. folks, today we're looking at a replacement #16 PT Rubber Shear Spring for your MORryde Trailer And RV Suspension Systems. So folks, this simply replaces a #16 rubber shear spring for your MORryde LRE, RS, or SRS suspension systems. Now it is just a basic shear spring. It's got metal and everything inside of here with the rubberized coating and everything, and you've got lots of different mounting holes as you can see. So again, a #16 PT rubber shear spring. more


Watch Video

6/24/2024 1:58:44 PM



Review of Kwikee Replacement Light Kit RV Electric Step - LC379414- Video

Review of Kwikee Replacement Light Kit RV Electric Step - LC379414

Hi everybody, Andy here with etrailer.com. Let's take a look together at this Kwikee replacement light kit. Now, this is going to replace the incandescent light on your Kwikee Electric Steps. On your screen, you see the series of steps that this is going to fit. So if you have one of those series of steps from Kwikee, this light will work for you. Now, this light does have an incandescent bulb. more


Watch Video

6/24/2024 1:47:11 PM



Review of MORryde Replacement 24 PT Rubber Shear Spring - MR95UR- Video

Review of MORryde Replacement 24 PT Rubber Shear Spring - MR95UR

Hello, neighbors. Steve here with etrailer.com. Let's take a look at our Replacement #24 PT Rubber Shear Spring for your MORryde Trailer and RV Suspension Systems. So, folks, this again is our Replacement #24 Rubber Shear Spring for those MORryde LRE, RS, and our SRS suspension systems. So, it has a number 24 embossed into the rubber coating here. I'll show you that right there. more


Watch Video

6/24/2024 1:36:05 PM



A Closer Look at the Aries Automotive 3" Round Nerf Bars Replacement Installation Hardware Kit- Video

A Closer Look at the Aries Automotive 3

Today we're gonna be taking a look at the replacement hardware for our Aries running board. If you've had your running board set up for a while, you might start noticing that your boards might feel a little bouncy and that might be 'cause your hardware's starting to rust out on ya, just like our neighbor here on this 20-year-old vehicle. It started to get corroded to the point where it actually fell completely through and this is where we went ahead and just threw some new brackets on, got some new bolts for 'em and got his boards mounted back up. Now when you get this kit, it's just gonna be the brackets itself and the hardware to attach the running boards. You're not actually gonna receive your running boards. This is gonna be a direct replacement for the hardware to your running boards. more


Watch Video

6/24/2024 1:26:12 PM



Review of Roadmaster Replacement Pin Sleeve D-Ring Bumper Mount Tow Bar Adapter - RM-A005020- Video

Review of Roadmaster Replacement Pin Sleeve D-Ring Bumper Mount Tow Bar Adapter - RM-A005020

Hi, everybody. Andy here with etrailer.com. Let's take a real quick look at this Roadmaster Replacement Pin Sleeve. This is going to replace one of the 3/4-inch stainless steel pin sleeves for your Roadmaster D-ring bumper mount tow bar adapters. On your screen, I am including the model number of that D-ring bumper mount tow bar adapter that this is going to work with. And this is the direct replacement from Roadmaster so you can trust that this is going to fit right in place of that original. more


Watch Video

6/24/2024 1:07:02 PM



Review of Thetford Thetford Titan Tote 2 Wheel to 4 Wheel Conversion Kit - TH44UE- Video

Review of Thetford Thetford Titan Tote 2 Wheel to 4 Wheel Conversion Kit - TH44UE

Hello neighbors and friends, Steve here with etrailer.com. Folks, today we're looking at our Thetford Titan Tote, two wheel to four wheel conversion kit. So folks, you've already got your Titan Tote and you have a two wheel option. Well, this four wheel conversion kit will make it much easier to pull your Titan Tote by adding front wheels and the handle, and bigger size rear wheels as well. It's easy to assemble this conversion kit. It's gonna include the steering assembly, the wheels and handle, and you've got the hardware here for installation and the installation instructions. more


Watch Video

6/24/2024 11:22:49 AM



Review of Kwikee Tray Trim Kit Slide Out Tray - LC380319- Video

Review of Kwikee Tray Trim Kit Slide Out Tray - LC380319

Hi, everybody, Andy here with etrailer.com. Let's take a real quick look together at this Kwikee tray trim kit. Now this trim kit is going to pair with a rail kit, which is sold separately to form a slide-out tray for your RV or camper's cargo compartment. This is going to require a carpeted, covered plywood, which, again, is not included with this, for the bottom to let you store and retrieve camping and hiking gear, tools and power cords, all without crawling into the compartment. Now this is going to fit cargo compartment openings as you see there on your screen of 36-inches wide. And then when you have this fully assembled, the tray weight capacity is gonna be 200 pounds. more


Watch Video

6/24/2024 10:58:11 AM



Review of Thule M6 x 17mm Bolt - 924-0617-11- Video

Review of Thule M6 x 17mm Bolt - 924-0617-11

Hello neighbors and friends Steven here with etrailer.com. Folks, today we're looking at a replacement M6 by 17 millimeter bolt without locking patch for the Thule Tracker Roof Rack Fit Kit. So folks, this does replace one quantity one bolt for the Thule Tracker Roof Rack Fit Kit TK9 or item number THTK9. It does allow for installation of that fit kit track, or it allows installation of the fit kit track onto your vehicle's factory installed fixed mounting points. And as you can see, it's got the allen head there as far as putting it in place for installation. So folks, again, quantity one, a direct replacement bolt from Thule, the M6 by 17 millimeter. more


Watch Video

6/24/2024 10:12:44 AM



Review of Thule Replacement Key N150 - THKEYN150- Video

Review of Thule Replacement Key N150 - THKEYN150

Hello neighbors, Steve here with etrailer.com. Today, we're looking at replacement key for your Thule racks and carriers, specifically key number N150. So folks, you're gonna get quantity one, one key, key to N150, and it's gonna look something like this. And as you can see, it is engraved there on the metal, N150. It is made by Thule. Again, just one replacement key. more


Watch Video

6/24/2024 10:10:53 AM



Review of Stromberg Carlson Replacement Cross Member Landing Gear - SC46MR- Video

Review of Stromberg Carlson Replacement Cross Member Landing Gear - SC46MR

Hi everybody, Andy here with etrailer.com. Let's take a brief look together at the Stromberg Carlson replacement cross members. This is going to replace the cross members for your Stromberg Carlson landing gear. And these are going to fit all Stromberg Carlson landing gears. And this is going to extend from 40 and 1/2 inches to 68 and 1/2 inches. So again, 40 and 1/2 inches to 68 and 1/2 inches wide. more


Watch Video

6/24/2024 10:09:49 AM



Review of Thule Replacement M6 Washer - 951061254- Video

Review of Thule Replacement M6 Washer - 951061254

Hello neighbors, Steve here with etrailer.com. Folks today we're looking at a replacement M6 washer for the Thule roof hitch and truck bed mount accessories. So folks, this is gonna replace one quantity one thin black M6 washer for your Thule roof mount accessories. It works with the M6 tamper proof screw and the M6 by 12 millimeter Allen bolt and other M6 bolts. Now to give you an idea, basically on size comparison, that's my fingertip, and this is my ballpoint pin that I just happened to use here for a reference. So M6, pretty small little washer. more


Watch Video

6/24/2024 10:05:56 AM



Review of Thule Replacement M12 Washer - 951-1224-54- Video

Review of Thule Replacement M12 Washer - 951-1224-54

Hello, neighbors and friends. Steve here with etrailer.com. Folks, today we're looking at a replacement M12 washer for your Thule hitch mounted carriers. So folks are gonna get quantity one M12 washer. It simply fits the Thule hitch mounted bike carriers. It's made out of metal. more


Watch Video

6/24/2024 10:00:32 AM



Review of Thomas Payne Universal Leg Kit Jackknife Sofa - 195-000017- Video

Review of Thomas Payne Universal Leg Kit Jackknife Sofa - 195-000017

Hi, everybody. Andy here with etrailer.com. Let's take a real quick look together at this Thomas Payne Universal Leg Kit. Now this universal leg kit is going to let you add a Thomas Payne RV jackknife sofa in an RV or camper. This is designed for RVs that don't actually have a preexisting platform or frame. And lemme go ahead and try to give you some measurements just so you have a good idea of the size of this kit. more


Watch Video

6/24/2024 9:54:34 AM



Review of Thule Replacement M6 x 25mm Carriage Bolt - 915-0625-54- Video

Review of Thule Replacement M6 x 25mm Carriage Bolt - 915-0625-54

Hello, neighbors, Steve here with etrailer.com. Today we're looking at a replacement M6 by 25 millimeter carriage bolt for the Thule Ride-On adapters. So folks, you're gonna get one, quantity one of the carriage bolt again for the Thule Ride-On adapter. It basically holds the clamp on in place on your square load bar, and it provides a nice threaded point for attaching the top mounting clamp on the ride-on nine hardware. It also fits the ride-on adapter and the Thule Velo Vice. And I'll put those item numbers on the screen in case you need to double check, and make sure that's what you have. more


Watch Video

6/24/2024 9:51:21 AM



Review of Fastway Replacement Tube Keys 312 - FA-KEY-312- Video

Review of Fastway Replacement Tube Keys 312 - FA-KEY-312

Hello, neighbors and friends, Steve here with etrailer.com. Folks, today we're looking at replacement tube keys for your Fastway Universal Coupler Lock, key to number 312. So, folks, this does replace two lost or damaged keys for your Fastway Universal Coupler Locks. Something like the image above my left shoulder here is what that coupler lock looks like. And you're gonna get two keys. Quantity two, they are key to number 312, or 312. more


Watch Video

6/24/2024 9:43:48 AM



Review of Fastway Replacement Tube Keys 308 - FA-KEY-308- Video

Review of Fastway Replacement Tube Keys 308 - FA-KEY-308

Hello, neighbors and friends, Steve here with etrailer.com. Folks, today we're looking at Replacement Tube Keys for your Fastway Universal Coupler Lock Key to 308. That's right, folks, so this key set here, quantity two keys, will replace lost or damaged keys for your Fastway Universal Coupler Lock. And that should look something like this image above my left shoulder. So again, folks, you're gonna get two replacement keys. Quantity two. more


Watch Video

6/24/2024 9:38:15 AM



Review of Yakima Replacement Key for Yakima Racks and Carriers A152 - Y8772-A152- Video

Review of Yakima Replacement Key for Yakima Racks and Carriers A152 - Y8772-A152

Hello, neighbors, Steven here with etrailer.com. Today we're looking at a replacement key for your Yakima Racks and Carriers, specifically key number A152. That's right folks, this replaces one, quantity one, replacing Yakima Key number A152, it's engraved right there on the metal as you can see. A lot of people say, Steve, how do I know which key number I need I don't have a key at all. I bought this product, maybe used online or something secondhand or given to me. Anyways, on the side of the lock core itself, if you can get to it and even see it, you'll see the engrave in A152. more


Watch Video

6/24/2024 9:29:21 AM



  2     3     4