Edge Insight CS Guage Display Installation - 1999 Dodge Ram- Video
Today on our 99 Dodge 2500 we'll be installing the Edge Insight CS, part number ep83730. In conjunction with the Edge Insight CS we will also be installing the accessory the Dash Pod which is part number ep38303. In this particular vehicle you'll notice that the customer already has a dash cover on it. We'll need to do some modifications to the dash cover for the Dash Pod to fit properly.We'll need to go ahead and first connect the three tabs that are supplied to the backside of the Dash Pod. They're numbered one, two and three and you will need to match up the tabs with one, two and three on the back of the Dash Pod. Now before you stick the tabs onto the Dash Pod we will use an alcohol swab to go ahead and clean the back of the Dash Pod to make sure the adhesive sticks properly.Once you've used the alcohol swab to go ahead to clean the back of the Dash Pod off you'll go ahead and pull the adhesive backing off of each of the tabs and stick them on the correlating numbers. more
5/20/2013 9:28:45 AM
Trailer Brake Controller Installation - 1999 Dodge Ram- Video
Today on our 1999 Dodge Ram Pickup, we'll be installing the eTrailer Brake Controller Installation Kit, part number ETBC7, in conjunction with the Tekonsha P3 Brake Controller, part number 90195-3020P. To start our install, we're going to go ahead and assemble the 7-pole and bracket using the hardware provided with our install kit. A quick tech tip: Before you install the bracket onto the vehicle, it may make it easier to go ahead and tape up your wires now. This will help protect the wires over time and provides a clean install look. Now, we've secured the bracket to the 7-pole connector. We'll go ahead and secure the bracket to the bumper. more
1/2/2013 10:52:00 AM
Trailer Brake Controller Installation - 1999 Dodge Ram Pickup- Video
Today on this 1999 Dodge 1500 Pickup, we are going to install part number 90185 Prodigy Brake controller. We are also going to install this T-1 harness part number 118329 from Tow Ready and we are going to install this brake controller also with part number ETBC7. First off we are going to start off installing the part of the T-1 wiring harness part number 118329. We need to do that so our ETBC7 has a 4-pole to plug into. The connection points are underneath the tail light over here. What we are going to do is push the button on top and pull down the bottom and it will come apart. And we are working on the passenger side. On the passenger side we will install the connector with the green wire. All right, we will go ahead and route our 4-pole wire over to the center and then we will run our yellow wire, run that over past the center to the driver side tail light and we will make the same connection underneath the driver side tail light. more
10/7/2009 1:16:46 PM
Trailer Brake Controller Installation - 1999 Dodge Pickup- Video
Today on this 1999 Dodge, we will be installing part number 90195-3020P. The P3 part. The first thing I want to note on this vehicle here at the rear is the 7-pole plug. This is actually a factory 7-pole plug which is going to allow us simply to plug our brake controller and adapter into place and go. To figure out if you have the factory 7-pole plug, you will note that this has got the welded bracket to the factory installed trailer hitch and if you actually look at the cover of the 7-pole, you will see the Chrysler logo and if you look closely you will see the actual Chrysler name written across the front. Those two indicators will help you know that you have got the correct factory plug. more
10/3/2009 4:00:16 AM
