Best 2015 BMW X1 Trailer Hitch Options- Video
Hey everybody, Ryan here at etrailer. Today we're gonna be checking out our best trailer hitch options for 2015 BMW X1. So today we're gonna be checking out four different hitches. All right, So this one up here, this is the CURT Hitch. This one here is the Draw-Tite. Below it we have the EcoHitch. more
8/31/2022 8:09:59 PM
Trailer Hitch Installation - 2015 BMW X1 - Curt- Video
Today on our 2015 BMW X1, we're going to be taking a look at and installing the Curt class 3 trailer hitch receiver. Part number C13140. Here's what this hitch is going to look like once it's installed on the vehicle. What I like most about this hitch is that it gives us a clean look on the vehicle but it's also very accessible and easy to use. The face of our receiver tube is almost flush with the rear bumper which is going to help make sure that we've got plenty of clearance for just about any type of accessories that we may want to use with this hitch. It features the 2"x2" receiver tube opening, has a nice welded on reinforcement collar all the way around, features the loop style safety chain connection points that are welded onto the bottom of the receiver. It features a 250 pound max ton weight rating, which is the total weight of anything that you have in your hitch and that's going to be the downward force here on the inside of the receiver. more
11/17/2016 2:51:04 PM
Trailer Hitch Installation - 2015 BMW X1 - Draw-Tite- Video
Today in our 2015 BMW X1 we're going to be taking a look at, and installing the Draw-Tite Class III Max-Frame trailer hitch receiver, part number 75761. Here's what this hitch is going to look like once it's installed on the vehicle. What I like most about this hitch is the bumper clearance that it gives you, so it should be nice and easy to use with just about any accessory, and it's going to maintain a clean look on the vehicle. This hitch features the two inch by two inch receiver tube opening nicely welded on the reinforcement collar around it. It's got the rolled steel safety chain connection points. Has a standard 5/8" hitch pin hole for securing all the Class III accessories. It's also got this half inch hole which is going to be good for use with the j-pin stabilization system which helps to eliminate some of the shake and play inside the receiver with the shank. The edge of this receiver tube opening is just a hair past the edge of the bumper, but it's not far enough past that it should really cause any issues like hitting your leg on it on a regular basis or any problems like that. It features a 400 pound max tongue weight rating which is the downward force on the inside edge of this receiver tube opening. It features a 3500 pound gross trailer weight rating, which is the weight of the trailer and anything which you may have on it. It is ready for use with the weight distribution system, and when used with weight distribution the tongue weight is going to stay the same, but the gross trailer weight rating is going to go up to 4000 pounds. more
11/17/2016 2:50:46 PM
