2017 Ram 2500 Fifth Wheel Hitch Installation And Review Videos

Best 2017 Ram 2500 Fifth Wheel Hitch Options- Video

Speaker 1: Today we're going to be taking a look at the best fifth wheel options for your 2017 Ram 2500. Here we have the Demco. This is going to be the Hijacker Autoslide fifth wheel. Here we have the B&W installed on our truck. That's going to be the Companion fifth wheel with slider. Finally here we have the CURT A16 fifth wheel with the R16 slider.Now every one of these fifth wheels is going to do the same thing. more

9/28/2017 3:15:02 PM

Curt A16 5th Wheel Trailer Hitch Installation - 2017 Ram 2500- Video

Today, on our 2017 Ram 2500 we're going to be taking a look at and installing the Curt A16 5th Wheel Trailer Hitch with R16 Slider, part number C16521. Here's what our 5th wheel hitch looks like fully installed. It's going to mount using our base rails here and it's going to allow us to tow a 5th wheel trailer. This is a six foot bed truck. If you've ever towed a 5th wheel with a short bed truck, you know that it comes in handy to have a slider like we have here whenever you're making tight turns. We come to this handle and we pull out. We can turn it and our 5th wheel's going to slide back 12" to give us extra clearance so we don't have to worry about our 5th wheel trailer hitting our cab. The slider is a nonbinding slider, so no matter what angle you're pulling your trailer at, it's going to be able to slide freely back and forth. Whenever we're done making that tight turn and getting around the corner, we can straighten our trailer out, straighten our truck out, and our slider's going to slide right back and lock into position. The jaw here is a two-piece jaw. more

5/1/2017 4:37:14 PM

B and W Gooseneck Trailer Hitch Installation - 2017 Ram 2500- Video

Today on our 2017 Ram 2500 we'll be installing the B&W Turnoverball Underbed Gooseneck Trailer Hitch with Custom Installation Kit, part number BWGNRK1384. All right, here's what our gooseneck looks like installed. As you can see, it's designed to work properly with our factory setup on our truck here. There was really no modification to the truck, just a couple minor drilling locations, and then it bolts in place where the factory prep package will be. Now that we've shown you the underside, we'll show you what it looks like on top. All right, here we are in the bed of the truck, and you can see what it looks like installed. As you can see, the only part we have really sticking out is our ball, 2 5/16 inch ball. more

1/25/2017 10:22:40 AM