Best 2012 Jeep Liberty Trailer Wiring Options- Video
Speaker 1: Today we're going to be taking a look at the best custom fit vehicle wiring harness for your 2012 Jeep Liberty. Here we're going to have the best three wiring harnesses for your vehicle. Over here on the left we're going to have the Hopkins. Here in the middle we're going to have to Tekonsha. Over here on the right we're going to have the CURT. Your CURT, we're going to have a six amp per circuit for your taillights and a three amp per circuit for your stop and turn, whereas your Tekonsha is going to have a 5.6 amp for your taillights and a 2.1 amp for your stop and turn.Now as far as Hopkins, the manufacturer doesn't list the power output for this wiring harness. more
2/19/2018 1:18:26 PM
Trailer Wiring Harness Installation - 2012 Jeep Liberty- Video
Today on our 2012 Jeep Liberty well be installing the Tow Ready T1 connector, part number 118554. First to begin our installation well open up the rear cargo door. Well need to remove the fasteners that secure the taillight housing in place. Starting here on the drivers side, well go ahead and remove the two fasteners and then gently pry the taillight housing away from its current position, being careful not to break the alignment tabs underneath. Now well go ahead and remove the taillight assembly by pressing on the locking tab for the connector and removing it from the assembly. Well go ahead and set it aside for reinstallation later. more
3/26/2013 10:33:19 AM