Trailer Hitch Installation - 2012 Chrysler 200 - Draw-Tite- Video
Today on our 2012 Chrysler 200, we're going to be installing the Draw-Tite Trailer Hitch Receiver, part number 24871. Now here's what our hitch looks like installed on our vehicle. Now we'll go ahead and give you a couple measurements in helping you choose some accessories for your hitch such as a bicycle rack or a cargo carrier. From the center of the hitch pin hole to the outer most edge of the bumper is approximately 7 1/4 inches. From the top of the opening in the receiver to the ground is approximately 11 inches. Now let's go ahead and install our hitch. Now we're first going to begin our installation by pointing out the rubber exhaust hangers that we need to remove so that we can temporarily lower down the exhaust to give our self a little more working room as well as allow the hitch to go up into position a little easier. more
12/12/2014 10:20:23 AM
Trailer Hitch Installation - 2012 Chrysler 200 - Curt- Video
Today on this 2012 Chrysler 200, we are going to install part number 11133 from Curt. Alright this is what the hitch looks like once installed on a vehicle. Next we'll go ahead and give you some measurements that will help you out in selecting some accessories such as a bicycle rack or a cargo carrier. From the center of the hitch pin hole, to the edge of the bumper is going to be 4 inches, and from the top of the receiver opening down to the ground is going to be 11 inches. Now I'll go ahead and show you how the hitch is installed. Now the first thing you do is fish wire a couple of bolts into the frame. more
5/17/2012 4:16:05 PM
