Best 2014 Ford Flex Trailer Wiring Options- Video
Hi there, Flex owners. Today on your 2014 Ford Flex, we're going to be taking a look at the best custom fit trailer wiring options. For your Flex, we have two custom wiring harnesses available. On the left we have our harness from Tekonsha. On the right we have our harness from CURT. Both of these harnesses are going to provide you with a four-pole flat connector at the back of the vehicle that you can plug into your trailer to get all of your necessary lighting. more
11/21/2019 1:39:34 PM
Trailer Wiring Harness Installation - 2014 Ford Flex- Video
Today on our 2014 Ford Flex we're going to be taking a look at and also showing you how to install the Hopkins plug in simple vehicle wiring harness with he four pole flat trailer connector. Part number is HM11140275. Now this is what our wiring kit's going to look like when we pull it out of the package. You can see we've got the inline connectors here. These are going to plug right in between our factory connectors so we won't have to modify the wiring in the vehicle at all. Runs down the yellow and brown's going to come from the drivers side while the green comes in from the passenger side. That signals going to be sent right out to our four pole connector. more
12/8/2016 4:55:55 PM
Trailer Wiring Harness Installation - 2014 Ford Flex 118472- Video
Today on our 2014 Ford Flex, we'll be installing the tow-ready T1 vehicle wiring harness with a four-pole flat trailer connector, part number 118472. In conjunction with our tow-ready wiring, we're going to be installing a short bracket, part number 18140, as well as the four flat connector bracket, part number 18144. To begin our installation we'll need to raise the rear hatch of the vehicle. In order to remove the tail light assembly, we'll need to take out this bolt here and this bolt here. Once we have the two bolts removed we'll need to gently pull towards the rear of the vehicle on the tail light assembly as there's a couple more tabs that we'll need to release that are behind the light assembly. Next we're going to disconnect the wiring from the back side of the light assembly. We'll push in right here on this little locking tab and gently pull outward. We'll go ahead and repeat the same process over here on the passenger side. more
5/9/2014 4:29:58 PM
