Brian: How's it going Brian here at etrailer.com. Today on our 2010 Ford F250, we're going to be taking a look at and showing you how to install the Curt under bed double lock gooseneck trailer hitch with installation kit. The hitch is going to be completely mounted underneath the bed and this is what it's going to look like once it's installed. What I really like about this hitch is the fact that we are going to have dual locking pins, which not only means double the safety, but also double the strength. And since the hitch is mounted underneath the bed, it's going to free up all that space up top so it's going to come in handy whether you're at the job site, hauling supplies around, maybe throwing a couple of motorcycles in the bed or even taking your family on vacation, we're not going to lose any of this precious space.One of the other things I noticed right away that's different from many of the other goosenecks available is the safety chain loops. They're going to be spring loaded so they're not going to bounce around, but they're also going to be very thick and very dependable. more
9/6/2019 11:47:13 AM
Gooseneck Trailer Hitch Installation - 2010 Ford F-350 Super Duty- Video
Today on our 2010 Ford F350 Super Duty, we're gonna be installing B&W's Turnover Ball Underbite Gooseneck Hitch, part number BWG NRK 1108. This gooseneck hitch is gonna allow you to hook up your gooseneck trailer and park behind your truck. The ball that comes with it can be removed and inserted upside down, storing it away, being nice and flush, so you have full access to your truck bed, as if it wasn't there. Your safety chains are spring loaded turned down snug against the bed of the truck so it can stay out of the way, but when you need them they simply pop up and they're ready to use. Additionally, the system can be used with B&W's companion, so you can put a fifth wheel insert in here on and now you're fit for a trailer as well.Okay, on our driver's side we'll have our release handle for our ball. We simply let it go inward to lock your ball into place, and when you need to take it out, flip it over, replace it with a different size, you simply pull it out, push it to the side, and that'll hold it in place so you can make your adjustments and lock it back down. more
1/9/2019 9:12:12 AM
Gooseneck Trailer Hitch Installation - 2010 Ford F-350 Super Duty 9460-48- Video
Today on our 2010 Ford F-350 Super Duty Crew Cab, were going to be installing the Draw-Tite Hide-A-Goose Underbed Gooseneck Trailer Hitch, part number 9460-48. Now with the handle in the open and in the lock-open position, go ahead and install the ball. Youll notice that theres a groove cut in to the end of the ball that goes on the driver side as theres a pin down in here that it lines up with. Go ahead and set the ball down in place, then we can release the handle locking the ball into position.Now when youre not using the ball, you can simply pull the handle, take the ball out, flip it over, slide it back down into position, and release the handle securing the ball into position. Heres also our safety chain loops. If you remember that they are spring-loaded underneath, so you can lift them up and hook the safety chain through it. more
8/13/2014 10:32:39 AM
