Curt Wiring Harness Installation - 2015 Dodge Grand Caravan- Video
Shane: Hi, I'm Shane with etrailer.com. Today, I'm going to walk through how to install the Curt four-pole wiring harness on your 2015 Dodge Grand Caravan, anywhere into your vehicle is going to allow you to pull a trailer or anything for that mirror that needs light functions to be sent from the vehicle so that you're legal and safe. It's going to give you your proper lighting functions, your brake lights, your turn signals, and your running lights. It's going to have a converter box on it. So it's going to protect your factory wiring from any back-feed from the trailer. If there's a wiring issue, it's going to give you three amps per circuit for your stop and turn signals and six amps per circuit for your taillights. more
11/5/2019 1:12:46 PM
Best 2015 Dodge Grand Caravan Trailer Wiring Options- Video
Today we're going to be taking a look at the best wiring options for your 2015 Dodge Grand Caravan. So here have the Curt, and that's going to be part C56150. Here in the middle we have the Tekonsha, which is going to be part number 118534. Finally here we have the Hopkins, which is going to be part number HM11141995. So this is going to be the end result of our wiring. We're going to have our four-pole flat coming out at the bottom towards our hitch. more
2/22/2017 1:28:12 PM
Trailer Wiring Harness Installation - 2015 Dodge Grand Caravan- Video
Today on our 2015 Dodge Grand Caravan we're going to be installing the Tow Ready custom fit vehicle wiring, part number 118534. This is what the harness is going to look like when we receive it. As you can see, we've got the brown and yellow t side. This goes to the driver side of the vehicle. We've got our green t side. This goes behind our passenger side taillight on the passenger side of the vehicle. more
3/2/2015 8:45:08 AM
Trailer Wiring Harness Installation - 2015 Dodge Grand Caravan C56150- Video
Today on our 2015 Dodge Grand Caravan, we'll be installing the Curt T-connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, part number C56150. To begin our install, we're first going to open up the rear hatch. Then we're going to remove the two fasteners that secure each of the taillight housing so that we can remove the taillight housing. Now to remove the taillight housing, we're simply going to pop it towards the rear of the vehicle freeing it from its fasteners being careful not to break the alignment pins underneath. Note, it can be easier if you get a flat blade screwdriver or a small plastic pry tool in behind the taillight assembly to get it to pop free. There are the two alignment pins underneath and the manufacturer's wiring as it goes into the taillight socket. To disconnect, we'll need to first unlock the red locking tab and then press on the lock connector, releasing it and we'll set it aside. more
1/5/2015 9:40:27 AM