bing tracking image

2013 Mercedes-Benz Sprinter Trailer Wiring Installation And Review Videos

     

Trailer Wiring Harness Installation - 2013 Mercedes-Benz Sprinter- Video

Trailer Wiring Harness Installation - 2013 Mercedes-Benz Sprinter

Today on our 2013 Mercedes-Benz Sprinter we're going to be installing the Tow Ready Upgraded Circuit Protected Modulite with 4 Pole Harness, part number 119179KIT. We're going to begin here by first opening up both of the rear doors of the vehicle. Now we've already gone and determined that the taillights are actually three wire system because the top light here is the brake light, the middle light here is the turn signal and this section right here is actually the running light. We're going to need to remove the light assembly from the vehicle by removing this screw here, here, and there. Go ahead and take our plastic trim panel tool here just work it in behind the light to release the snaps, the clips, that hold it in place. In order to get the light plug out here you're going to need to . there's a little locking tab on the top and bottom. Just take a little flat head screw driver and just kind of push it in as you work the tab outward. more


Watch Video

2/12/2015 2:52:33 PM



  1