Trailer Wiring Harness Installation - 2008 Kia Sorento- Video
Today on our 2008 Kia Sorento, we'll be installing the Curt Custom Fit Vehicle Wiring, part number 56146KIT. To begin our installation, we'll first need to remove some interior trim components. We'll raise the rear cargo cover. Once we raise up the rear cargo cover, we'll then remove the carpeted quarter panels. We'll go ahead and remove those and set them aside for installation later. Then raise the rear cargo tray, to do this we'll first need to remove the five fasteners across the back. To remove the rear fasteners, you'll simple screw out the center section with a Phillips screwdriver and then remove the two piece fastener. more
10/7/2014 4:32:38 PM
Trailer Wiring Harness Installation - 2008 Kia Sorento c57674- Video
Today, on our 2008 Kia Sorento, we'll be adding the adapter four-pole to seven-pole with test lamps, part number C57674. After this application, we'll only be connecting the ground running lights and turn signals. To begin our install, we'll first mount the seven-pole the bracket onto the seven-pole connector. We'll use the hardware provided with the seven-pole kit.Now, for this application, we'll only be using the four-pole connector, so were going to go ahead and fold under the extra wiring and tape it up to clean up our install look. Now, with that done, we'll go ahead and add the Draw Tite no-drill mounting bracket, part number 18136. Once secured, we'll attach the no-drill mounting bracket to the hitch using the worm clamp provided.Now, with that secured, we'll go ahead and route the seven-pole wiring up over the hitch and secure it to the fourth pole connector already on the vehicle. more
5/13/2013 3:41:13 PM
