bing tracking image

2009 Scion xB Trailer Hitch Installation And Review Videos

     

Best 2009 Scion xB Trailer Hitch Options- Video

Best 2009 Scion xB Trailer Hitch Options

Speaker 1: Today we're going to be taking a look at the best trailer hitch options for your 2009 Scion XB. Here on the top, we're going to have the CURT, part number 12490. Here on the bottom we're going to have the Draw-Tite, part number 24815.Let's go over some of the differences between these two. Our CURT here, you can see the cross tube is a lot thicker. It's going to be a lot more durable. It's also going to have a reinforced collar. more


Watch Video

8/7/2018 1:37:25 PM



Draw-Tite Sportframe Trailer Hitch Installation - 2009 Scion xB- Video

Draw-Tite Sportframe Trailer Hitch Installation - 2009 Scion xB

Speaker 1: Today on our 2009 Sion XB, you're gonna be taking a look at and I'm gonna be showing you how to install the Draw-Tite class one sports frame trailer hitch receiver, part number 24815. This is what our hitch looks like when it's installed. You can see the cross tube is completely hidden behind the bumper fascia. Our receiver tube is nice and tucked in. It's not sticking out past the edge of our bumper fascia, so we're not gonna have to worry about hitting our legs or our shins on it when we're loading and unloading the vehicle. This is gonna be a class one hitch, inch and a quarter by inch and a quarter, so you wanna make sure you're only carrying class one accessories.It's gonna have a rolled steel style safety chain rings, so it's gonna give you plenty of room for different sized safety chain hooks. more


Watch Video

8/1/2018 11:27:13 AM



Trailer Hitch Installation - 2009 Scion xB - Curt- Video

Trailer Hitch Installation - 2009 Scion xB - Curt

Today on this 2009 Scion xB we will be installing trailer hitch part number 12490 from Curt. Okay we are underneath the vehicle and we are taking a look at the passenger-side frame rail. I am going to go ahead and point out the mounting locations for the trailer hitch. As you can see here at the end of the frame rail we have got three existing weld nuts, and we are going to be using those as our attaching points. We will be taking the 12 millimeter bolts and conical tooth washers that are provided with our installation kit and threading them directly in there. more


Watch Video

9/15/2009 10:50:41 AM



  1