bing tracking image

2005 Dodge Caravan Trailer Hitch Installation And Review Videos

     

Trailer Hitch Installation - 2005 Dodge Caravan - Draw-Tite- Video

Trailer Hitch Installation - 2005 Dodge Caravan - Draw-Tite

Today on this 2005 Dodge Caravan we're going to install part number 36296 from Draw-Tite. Next we'll give you some measurements to help you out in selecting some accessories, such as a bicycle rack or a cargo carrier. From the top of the receiver opening down to the ground will be about 12-1/4". From the center of the hitch pinhole to the edge of the bumper will be about 3-3/4". Now we'll go ahead and show you how the hitch is installed. We're underneath our vehicle and the first thing we need to do is go ahead and remove this bolt here. We'll do this on each side of the van. more


Watch Video

12/1/2014 3:38:59 AM



Trailer Hitch Installation - 2005 Dodge Caravan - Draw-Tite 24702- Video

Trailer Hitch Installation - 2005 Dodge Caravan - Draw-Tite 24702

Today on our 2005 Dodge Caravan, we're going to install part number 24702. This is a class 2, 1 1/4" receiver hitch from Draw-Tite. Next, we'll give you some measurements to help you out in selecting some accessories such as a bicycle rack or cargo carrier. From the top of the receiver opening down to the ground will be about 12" and from the center of the hitch pin hole to the outside edge of the bumper will be about 4". Now, we'll go ahead and show you how the hitch is installed. We're underneath the vehicle and the first thing we need to do is go ahead and remove this bolt here. more


Watch Video

12/1/2014 3:36:34 AM



Trailer Hitch Installation - 2005 Dodge Caravan- Video

Trailer Hitch Installation - 2005 Dodge Caravan

Today on this 2005 Dodge Caravan, we're going to be installing Curt Hitch part number 12362. Before we get started with the installation, we're going to go ahead and show you a couple of final installed dimensions which will help make choosing your hitch accessories a little bit easier. From the top of the receiver tube opening to the ground is going to measure 12 inches, and from the center of the pinhole to clear the rear edge of the bumper is going to measure right at 2 1/2 inches. And now I'll go ahead and move on to installation. Ok, we're up underneath the vehicle here and we're going to go ahead and point out the mounting holes we're going to be using to attach the hitch to the vehicle. Starting over here on the drivers side, you can see we've got two existing bolts here. more


Watch Video

1/26/2012 10:00:51 AM



  1