Curt Trailer Hitch Installation - 2017 Ford Edge Video

Yes, it will. I checked with our vendor and the etrailer Hitch item #e34AR is confirmed to fit the Titanium model of the 2020 Ford Edge. This hitch is custom fit and bolts to your Ford with included hardware. The etrailer item #e34AR is made in the…

The universal mount that is on the Rhino-Rack J-Style Kayak Carrier, part #S512, is designed for strength and stability. We do not offer any kayak carriers that have a T-bolt attachment for the channels in the Aero crossbars you said you have. The…

We do! I recommend going with the etrailer Trailer Hitch Receiver #e36RR for your 2017 Lincoln MKX because it has a matte black finish that looks better and blends in more with any black trim on your vehicle. This has a hidden crosstube so only the…

I recommend using the Curt Fusion Ball Mount #C45154 for towing the U-Haul trailer with your SUV. This ball mount has a 4" drop to help level the trailer. It is important to level the trailer as best as possible when towing. Having the trailer…

The cargo bag part #988501 that you referenced is an etrailer.com brand bag. Limited lifetime warranty means that it will be free from defects for the lifetime of the product. I attached a review video for this bag for you to check out as well.

Although you wouldn't be able to fold it up because the spare tire would get in the way, the Curt #C18151 carrier has a hitch pin hole to closest edge of carrier distance of 19 inches, as you can see in the provided photo. If you click the…

The first thing you will need to do is measure the distance from the hitch pin hole in your receiver to the furthest rearward point of your spare tire, as shown in the photo and FAQ article I provided. In order for the cargo carrier to be able to…

You should have no problem using our etrailer.com Hitch Receiver Lock, #e98882, on the factory hitch of your 2005 Ford Excursion. We have not tested this hitch lock with the factory hitch on an Excursion, but we have not received any complaints with…

Hitch pins and hitch pin locks like the part #e98882 that you referenced don't actually bear any weight when used with a ball mount so they don't have weight capacities. The ball mount and ball takes the downward force of the tongue weight so…

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

Roof racks and roof cargo boxes/baskets can be expensive pretty quick and since your 4Runner has a factory hitch I'd recommend going with a hitch cargo carrier. Loading and unloading things at the rear of a vehicle hitch is much easier than the…

The width of the cradles on the etrailer 4 Bike Rack for 2" Hitches #e98913 measures out to 8-1/2". If the frame of your wife's bike won't allow it to fit on this rack properly then it sounds like you're needing a bike frame…