How Thick are the Leaves in 4-Leaf Double-Eye Spring For 3,500 Pound Trailer Axles, # e54SR
Question:
What is the combined thickness of the e54SR spring or thickness of one leaf. Thanks
asked by: Rick R
0
Expert Reply:
I went out to the warehouse and pulled a 4-Leaf Double-Eye Spring # e54SR to measure. At the center of the spring where the bolt is, the total width, including the bolt, is 2 inches. The width of just the leaves is 1.30 inches. Each leaf is approximately 0.30 inches thick.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/8" Long
- Trailer Leaf Springs
- Double Eye Springs
- 3500 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 25-1/8 Inch Long
- Painted
- etrailer
more information >
Continue Researching
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Double-Eye Trailer Suspension System Review
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Most Popular Wheel Bearings
- Article: Where to Position the Trailer Axle?
- Q&A: Suspension Parts Needed for 3,500 lb Tandem Axles and 29-1/2" Hanger Spacing
- Article: How to Raise Your Travel Trailer Height
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Q&A: How to Measure Trailer Leaf Spring to Find Correct Replacement
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Q&A: Storage Latch For The Furrion RV Refrigerator # FCR14ACBQASS
- Q&A: Can I Upgrade Leaf Springs on Utility Trailer With 3500 Lb Axle
- Q&A: How To Measure To Make Sure The MORryde CRE3000 Equalizers Will Fit Your Trailer
- Q&A: Is it Ok to Replace Factory Leaf Springs With a Higher Capacity Option?