How Does the E-Track System Install to a Trailer
Question:
WHAT SIZE SCREW AND HOW YOU FASTER THE RAIL TO SIDE OF THE TRAILER
asked by: Harold
Helpful Expert Reply:
The E-Track Trailer Cargo Control # E19148 can be secure by screws, rivets, or welding.
If you went with screws to install this you would need to base the size of the screw on how thick the wood is you are attaching the track to. For example, if your trailer had 3/4 inch thick plywood you would want to use a 1/2 inch long wood screw. I would recommend using every other hole of the track for installing the tracks.
Check out the video I attached to the right for more info.
Product Page this Question was Asked From
Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 5' Long - Qty 1
- E-Track
- E-Track Rails
- Horizontal
- 5-1/8 Inch Wide
- 2000 lbs
- 5 Feet Long
- Erickson
more information >
Continue Researching
- Article: How to Install E-Track in 3 Easy Steps
- Q&A: Is E-track Stronger Than X-track, Is There An Advantage Of One Over The Other
- Q&A: Differences Between Different Brands of E-Track
- Q&A: Can E Track be Used to Secure Car in Car Hauler Trailer
- Q&A: Where to Attach E-Track to Aluminum Bed Trailer for Max Holding Strength
- Q&A: Corrosion Concerns When Installing E-Track On Aluminum Trailer
- Q&A: Best 2 Inch Hitch for a 2023 Kia Sportage
- Q&A: Hardware Recommendations for Installing E-Track
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Determining Trailer Tongue Weight
- Article: How (and Where) to Connect an RV Propane Grill
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide